PUMPS | 3

K Series Compressor Pumps

Clone Replacement Line for Kellogg

X1030

Model #R321
ACS (1-2 HP)

  • Delivers: 7.4 CFM at 175 PSI (2 HP)
  • Cast-Iron Construction
  • Slow Speed (705 RPM)
  • Steel Rods with Automotive Type
    Inserts and Needle Bearings at
    Wrist Pins
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading

*Replacement Clone for Kellogg

X1032

Model #R335HU*
ACS (3-5 HP)

  • Delivers: 17.2 CFM at 175 PSI (5 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Steel Rods with Automotive Type
    Inserts and Needle Bearings at
    Wrist Pins
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

X1031

Model #Z332
ACS (3,5 & 7 HP)

  • Delivers: 17.2 CFM at 175 PSI ( 5 HP )
  • Delivers: 25 CFM at 175 PSI ( 7.5 HP )
  • Cast-Iron Construction
  • Long Stroke Design
  • Automotive Type Inserts
    and Needle Bearings at Wrist Pins
  • Centrifugal Unloading
  • Optional Head Unloading

*Replacement Clone for Kellogg

X1034

Model #R452HU*
ACS (7.5-10 HP)

  • Delivers: 35.2 CFM at 175 PSI (10 HP)
  • Cast-Iron Construction
  • Slow Speed (730 RPM)
  • Steel Rods with Automotive Type
    Inserts and Needle Bearings at
    Wrist Pins
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

X1033

Model #R352HU*
ACS (10 HP)

  • Delivers: 34 CFM at 175 PSI (10 HP)
  • Cast-Iron Construction
  • Slow Speed (645 RPM)
  • Steel Rods with Inserts
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

X1035

Model #Z462HU*
ACS (15-25 HP)

  • Delivers: 81.5 CFM at 175 PSI (25 HP)
  • Cast-Iron Construction
  • Slow Speed (775 RPM)
  • Steel Rods with Inserts
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

Part # Model HP Stage Cylinder Weight
X1030 R321 1-2 2 2 121
X1031 z332 3,5 & 7.5 2 2 240
X1032 R335HU* 3-5 2 2 220
X1033 R352HU* 10 2 2 480
X1034 R452HU* 7.5-10 2 4 310
X1035 R462HU* 15-25 2 4 793

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

PUMPS | 4

Replacement Compressor Pumps

X1104

Model #KU
Jenny (1-2 HP)

  • Delivers: 8 CFM at 125 PSI (2 HP)
  • Also for 5.5 HP Engine Driven Units
  • Cast-Iron Construction
  • Suitable for 56 Frame Motors
  • Includes Head Unloaders

X1108

Model #VT4923
Campbell Hausfeld (2-5 HP)

  • Delivers: 6.4 CFM at 90 PSI (2-5 HP)
  • Cast-Iron Construction
  • Suitable for 56 Frame Motors

U1256

Model #EC5
ACS (5 HP)

  • Delivers: 17 CFM at 175 PSI (5 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Inserted Rods
  • Centrifugal Unloading
  • Head Unloading on UT50U model
  • Suitable for 184T Frame Motor

U1258

Model #EC10
ACS (10 HP)

  • Delivers: 34 CFM at 175 PSI (10 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Inserted Rods
  • Centrifugal Unloading
  • Head Unloading on UT100U model
  • Suitable for 215T Frame Motor

X1011

Model #LCOB
Chinook (1.5-3 HP)

  • Cast-Iron Cylinder
  • Inserted Connecting Rods
  • 9.0 CFM @ 100 PSI
  • Suitable for 145 Frame Motor

UX1009

Model #LCOC
Chinook (2-5 HP)

  • Cast-Iron Cylinder
  • Inserted Connecting Rods
  • 13.5 CFM @ 175 PSI
  • Suitable for 184 Frame Motor

 

Part # Model HP Stage Cylinder Weight
X1104 KU 1-2 1 2 50 lbs.
X1108 VT 2-5 1 2 36 lbs.
X1256 EC-5 5 2 2 240 lbs.
X1257 EC-5U** 5 2 2 245 lbs.
X1258 EC-10 10 2 4 335 lbs.
X1259 EC-10U** 10 2 4 340 lbs.
X1011 LCOB K17 1.5-3 1 2 35 lbs.
X1009 LCOC K24 2-5 2 2 45 lbs.

**U models indicate head unloading feature for constant run (dual control) or engine applications.  Bolt Dimensions >>

 

PUMPS | 5

U1264

Model #UB20
Unoair (2 HP)

  • Delivers: 8 CFM at 100 PSI (2 HP)
  • Cast-Iron Construction
  • Suitable for 56 and 145 Frame Motors

U1261

Model #UH30
Unoair (3 HP)

  • Delivers: 13.8 CFM
  • Cast-Iron Construction
  • Suitable for 182 Frame Motors

U1286

Model #UH30D
Unoair (2-5 HP)

  • Delivers: 8 CFM at 100 PSI (2-5 HP)
  • Cast-Iron Construction
  • Suitable for 56 and 145 Frame Motors

X1116

Model #SZ-MSL10
Schulz (2-5 HP)

  • Delivers: 5.9 CFM at 100 PSI (2-5 HP)
  • Cast-Iron Construction
  • Suitable for 56 Frame Motors

X1107

Model #MSV40MAX
Schulz (7.5 HP)

  • Delivers: 25.5 CFM at 175 PSI (7.5 HP)
  • Cast-Iron Construction
  • 995 RPM
  • Suitable for 215T and 213T Frame Motors

X1115

Model #MSW60MAX
Schulz (15 HP)

  • Delivers: 47 CFM at 175 PSI (15 HP)
  • Cast-Iron Construction
  • 1065 RPM
  • Centrifugal Unloading
  • Suitable for 254T Frame Motor
Part # Model HP Stage Cylinder Weight
U1264 UB20 2 1 2 44 lbs.
U1261 UH30 3 1 2 53 lbs.
U1286 UH30D 2-5 1 2 53 lbs.
X1116 SZ-MSL10 2-5 1 2 35 lbs.
X1107 EC-7 MSV40MAX 7.5 2 2 210 lbs.
X1115 EC-15 MSW60MAX 15 2 3 325 lbs.

Bolt Dimensions >>

PUMPS | 6

Gray Line Series Compressor Pumps

Economy Replacement Line

X1200

Model #GL335HU
ACS (5 HP)

  • Delivers: 17.2 CFM at 175 PSI (5 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Steel Rods with Automotive Type Inserts and Needle Bearings at Wrist Pins
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

X1215

Model #GL5
ACS (5 HP)

  • Delivers: 17 CFM at 175 PSI (5 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Inserted Rods
  • Centrifugal Unloading
  • Suitable for 184T Frame Motor

*Replacement Clone for Saylor Beall 705

X1205

Model #GL452HU
ACS (10 HP)

  • Delivers: 35.2 CFM at 175 PSI (10 HP)
  • Cast-Iron Construction
  • Slow Speed (730 RPM)
  • Steel Rods with Automotive Type Inserts and Needle Bearings at Wrist Pins
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

X1220

Model #GL10
ACS (10 HP)

  • Delivers: 34 CFM at 175 PSI (10 HP)
  • Cast-Iron Construction
  • Slow Speed (700 RPM)
  • Inserted Rods
  • Centrifugal Unloading
  • Suitable for 215T Frame Motor

*Replacement Clone for Saylor Beall 707

X1210

Model #GL462HU
ACS (15-25 HP)

  • Delivers: 81.5 CFM at 175 PSI (25 HP)
  • Cast-Iron Construction
  • Slow Speed (775 RPM)
  • Steel Rods with Automotive Type Inserts
  • Positive Ring Fed Lubrication
  • Centrifugal Unloading
  • Head Unloading

*Replacement Clone for Kellogg

Special Note

We highly recommend replacing check valves, belts and replacing, or thoroughly cleaning exhaust tube (from pump to tank) when replacing pump. Always use our #3 “Compressor Oil”. (Automotive type oils lack adequate heat range and may damage pump.) Always use our S3000 or # 3 “Compressor Oil”.

Actual packed shipping weights may vary on all pumps. Pumps are not painted to a finished quality.

Part # Model HP Stage Cylinder Weight
X1200 GL335HU 5 2 2 220
X1215 GL5 5 2 2 240
X1205 GL452HU 10 2 4 310
X1220 GL10 10 2 4 335
X1210 GL462HU 15-25 2 4 793

Bolt Dimensions >>

PUMPS | 7

RF Series Compressor Pumps

Clone Replacement Line for Fusheng & Curtis

U1610

Model #RF20S
ACS (2 HP)

U1650

Model #RF50T
ACS (5 HP)

U1670

Model #RF15T
ACS (15 HP)

 

Part # Model Replaces
Fusheng
Replaces
Curtis
HP STAGE Cylinder Air Delivery RPM Weight
X1600 RF10S VA-65 ES-10 1 1 2 3 CFM @ 115 PSI 510 45 lbs.
U1610 RF20S TA-65 ES-20 2 1 3 6.7 CFM @ 115 PSI 680 64 lbs.
U1620 RF23T HTA-65 E-23 2 2 3 6.0 CFM @ 175 PSI 780 60 lbs.
U1630 RF30S VA-80 ES-30 3 1 2 10.6 CFM @ 115 PSI 800 110 lbs.
U1640 RF50S TA-80 ES-50 5 1 3 18.4 CFM @ 115 PSI 880 155 lbs.
U1650 RF50T HTA-80 E-50 5 2 3 15.9 CFM @ 175 PSI 950 148 lbs.
U1660 RF71T HTA-100 E-71 10 2 3 28.3 CFM @ 175 PSI 990 227 lbs.
U1670 RF15T HTA-120 E-15 15 2 3 44 CFM @ 175 PSI 900 411 lbs.

Bolt Dimensions >>

 

 

Part # Model HP RPM CFM Stage Cylinder Weight
P4000 OPS010 1.5-1 620-855 5.3/3.6 1 1 34
P4005 OPS030 2-3 845-1115 10.1/6.5 1 2 65
P4010 OPT050 5 860 17.9 2 2 95
P4015 OPT100 7.5-10 885-1090 35/26.1 2 3 134
P4020 OPT150 15 1140 47 2 3 137
P4025 SLAE03EB 3 3140 8.8 SCROLL SCROLL 39
P4030 SLAE05E 5 3250 15.2 SCROLL SCROLL 52

* RPM and SCFM ratings are @ 100 PSIG. Bolt Dimensions >>

 

COMPRESSORS | 8

COMPRESSORS | 9

5 HP TWO STAGE CONFIGURATIONS

 

Model HP Phase Volt CFM Pump Tank Weight Part # Part # With Starter Unit Part #
EC5H8 5 1 230 16 EC5 80-H 780 E1010 E1500 1,858.10 E1227
EC5H8 5 3 208 17 EC5 80-H 780 E10128 E1502 1,906.13 E1240
EC5H8 5 3 230 17 EC5 80-H 780 E1012 E1503 1,906.13 E1226
EC5H8 5 3 460 17 EC5 80-H 780 E1012 E1504 1,906.13 E1225
EC5V8 5 1 230 16 EC5 80-V 820 E1011 E1501 1,758.60 E1241
EC5V8 5 3 208 17 EC5 80-V 820 E10138 E1505 1,806.63 E1242
EC5V8 5 3 230 17 EC5 80-V 820 E1013 E1506 1,806.63 E1243
EC5V8 5 3 460 17 EC5 80-V 820 E1013 E1507 1,806.63 E1244
K5H8 5 1 230 16 335 80-H 710 K2042 K1500 1,968.63 K2012
K5H8 5 3 208 17 335 80-H 710 K20138 K1502 2,013.04 K2100
K5H8 5 3 230 17 335 80-H 710 K2013 K1503 2,016.51 K2018
K5H8 5 3 460 17 335 80-H 710 K2013 K1504 2,016.51 K2017
K5V8 5 1 230 16 335 80-V 750 K2022 K1501 1,865.15 K2101
K5V8 5 3 208 17 335 80-V 750 K20258 K1505 1,909.56 K2102
K5V8 5 3 230 17 335 80-V 750 K2025 K1506 1,913.03 K2103
K5V8 5 3 460 17 335 80-V 750 K2025 K1507 1,913.03 K2104

** CFM Rating based on 175 PSI / Note: Add approximately 100 lbs. for crated shipping weight.

COMPRESSORS | 10

7.5 – 10 HP TWO STAGE CONFIGURATIONS

 

Model HP Phase Volt CFM Pump Tank Weight Part # Part # Part #
K7ZV81 7.5 1 230 26 Z332 80-V 639 K1564 K1560 K11568
EC5H8 5 3 208 17 EC5 80-H 780 E10128 E1502 E1240
EC5H8 5 3 230 17 EC5 80-H 780 E1012 E1503 E1226
EC5H8 5 3 460 17 EC5 80-H 780 E1012 E1504 E1225
EC5V8 5 1 230 16 EC5 80-V 820 E1011 E1501 E1241
EC5V8 5 3 208 17 EC5 80-V 820 E10138 E1505 E1242
EC5V8 5 3 230 17 EC5 80-V 820 E1013 E1506 E1243
EC5V8 5 3 460 17 EC5 80-V 820 E1013 E1507 E1244
K5H8 5 1 230 16 335 80-H 710 K2042 K1500 K2012
K5H8 5 3 208 17 335 80-H 710 K20138 K1502 K2100
K5H8 5 3 230 17 335 80-H 710 K2013 K1503 K2018
K5H8 5 3 460 17 335 80-H 710 K2013 K1504 K2017
K5V8 5 1 230 16 335 80-V 750 K2022 K1501 K2101
K5V8 5 3 208 17 335 80-V 750 K20258 K1505 K2102
K5V8 5 3 230 17 335 80-V 750 K2025 K1506 K2103
K5V8 5 3 460 17 335 80-V 750 K2025 K1507 K2104

** CFM Rating based on 175 PSI / Note: Add approximately 100 lbs. for crated shipping weight.

15 – 25 HP TWO STAGE CONFIGURATIONS

 

Model HP Phase Volt CFM Pump Tank Weight Part # Part # Part #
K7ZV81 7.5 1 230 26 Z332 80-V 639 K1564 K1560 K11568
EC5H8 5 3 208 17 EC5 80-H 780 E10128 E1502 E1240
EC5H8 5 3 230 17 EC5 80-H 780 E1012 E1503 E1226
EC5H8 5 3 460 17 EC5 80-H 780 E1012 E1504 E1225
EC5V8 5 1 230 16 EC5 80-V 820 E1011 E1501 E1241
EC5V8 5 3 208 17 EC5 80-V 820 E10138 E1505 E1242
EC5V8 5 3 230 17 EC5 80-V 820 E1013 E1506 E1243
EC5V8 5 3 460 17 EC5 80-V 820 E1013 E1507 E1244
K5H8 5 1 230 16 335 80-H 710 K2042 K1500 K2012
K5H8 5 3 208 17 335 80-H 710 K20138 K1502 K2100
K5H8 5 3 230 17 335 80-H 710 K2013 K1503 K2018
K5H8 5 3 460 17 335 80-H 710 K2013 K1504 K2017
K5V8 5 1 230 16 335 80-V 750 K2022 K1501 K2101
K5V8 5 3 208 17 335 80-V 750 K20258 K1505 K2102
K5V8 5 3 230 17 335 80-V 750 K2025 K1506 K2103
K5V8 5 3 460 17 335 80-V 750 K2025 K1507 K2104

** CFM Rating based on 175 PSI / Note: Add approximately 100 lbs. for crated shipping weight.

COMPRESSORS | 11

Two Stage Units Extra Options

The following are installed options that can be added to our two stage units

Dual Control

Part # HP Model
X8011 5 ACS & EC
X8013 5 K Series
X8012 10 ACS & EC
X8014 10 K Series
na 15-25 K Series

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

Beltguard Aftercoolers

Part # HP
X6034 5
X6031 10
X6017 15-25
X6049 30

Tank Options

Part # Change Tank from
X8046 30 GAL HORZ TO 60 HORZ
X8043 80 GAL H or V TO 120 VERT
X8044 80 GAL H or V TO 120 HORZ
X8041 120 GAL HORZ TO 120 VERT
X8042 120 GAL HORZ TO 240 HORZ

Automatic Tank Drain

Part # Type
X1071 Pneumatic
X1072 *Electronic

*The Electronic Drain is shipped loose as a kit with fittings for field mounting in order to protect it during shipment.

Low Oil Switch

Part # Model
X2104 Low Oil Switch Standard – Installed Option
X2105 Low Oil Switch Vented – Installed Option

Hour Meters

Part # Model
X4630 Hour Meter 115-230V – Installed Option
X4632 Hour Meter 460V – Installed Option

Other Options

• Special Electrical Enclosures
• TEFC or Explosion Proof Motors
• Vibration Pads
• Dryers, Filters, Regulators, Coalescors

COMPRESSORS | 12

COMPRESSORS | 13

Duplex Unit Configurations

Part # Model HP Phase Volt Pump Tank CFM L x W x H Weight Style
X8500 DUPLEX-K5H12D1-230 5 1 230 335 120 40 76x29x57 1000 B
X8501 DUPLEX-K5H12D3-208 5 3 208 335 120 40 76x29x57 1000 B
X8502 DUPLEX-K5H12D3-230 5 3 230 335 120 40 76x29x57 1000 B
X8503 DUPLEX-K5H12D3-460 5 3 460 335 120 40 76x29x57 1000 B
X8504 DUPLEX-K10H12D1-230 10 1 230 452 120 80 76x50x57 2000 A
X8505 DUPLEX-K10H12D3-208 10 3 208 452 120 80 76x50x57 2000 A
X8506 DUPLEX-K10H12D3-230 10 3 230 452 120 80 76x50x57 2000 A
X8507 DUPLEX-K10H12D3-460 10 3 460 452 120 80 76x50x57 2000 A
X8508 DUPLEX-K15H24D3-208(GHT) 15 3 208 462 240 124 89x78x78 3350 A
X8509 DUPLEX-K15H24D3-230(GHT) 15 3 230 462 240 124 89x78x78 3350 A
X8510 DUPLEX-K15H24D3-460(GHT) 15 3 460 462 240 124 89x78x78 3350 A
X8511 DUPLEX-K20H24D3-208(GHT) 20 3 208 462 240 164 89x78x78 3400 A
X8512 DUPLEX-K20H24D3-230(GHT) 20 3 230 462 240 164 89x78x78 3400 A
X8513 DUPLEX-K20H24D3-460(GHT) 20 3 460 462 240 164 89x78x78 3400 A
X8514 DUPLEX-K25H24D3-208(GHT) 25 3 208 462 240 163 89x78x78 3600 A
X8515 DUPLEX-K25H24D3-230(GHT) 25 3 230 462 240 163 89x78x78 3600 A
X8516 DUPLEX-K25H24D3-460(GHT) 25 3 460 462 240 163 89x78x78 3600 A
X8521 DUPLEX-EMK-100H6D1-115/230 1 1 115/230 KU 60 8 52x22x40 430 B
X8522 DUPLEX-EMK-100H6D3-208 1 3 208 KU 60 8 52x22x40 430 B
X8523 DUPLEX-EMK-100H6D3-230 1 3 230 KU 60 8 52x22x40 430 B
X8524 DUPLEX-EMK-100H6D3-460 1 3 460 KU 60 8 52x22x40 430 B
X8525 DUPLEX-LCOB-150H61-115/230 1.5 1 115/230 LCOB 60 12 52x22x40 440 B
X8526 DUPLEX-LCOB-150H63-208 1.5 3 208 LCOB 60 12 52x22x40 440 B
X8527 DUPLEX-LCOB-150H63-230 1.5 3 230 LCOB 60 12 52x22x40 440 B
X8528 DUPLEX-LCOB-150H63-460 1.5 3 460 LCOB 60 12 52x22x40 440 B
X8529 DUPLEX-LCOB-200H61-230 2 1 115/230 LCOB 60 16 52x22x40 450 B
X8530 DUPLEX-LCOB-200H63-208 2 3 208 LCOB 60 16 52x22x40 450 B
X8531 DUPLEX-LCOB-200H63-230 2 3 230 LCOB 60 16 52x22x40 450 B
X8532 DUPLEX-LCOB-200H63-460 2 3 460 LCOB 60 16 52x22x40 450 B

COMPRESSORS | 14

Simplex Unit Configurations

Part # Model HP Phase Volt Pump Tank CFM L x W x H Weight Style
X8537 SIMPLEX-EMK-100H31-115/230 1 1 115/230 KU 30 4 42x20x40 260 B
X8538 SIMPLEX-EMK-100H33-208 1 3 208 KU 30 4 42x20x40 260 B
X8539 SIMPLEX-EMK-100H33-230 1 3 230 KU 30 4 42x20x40 260 B
X8540 SIMPLEX-EMK-100H33-460 1 3 460 KU 30 4 42x20x40 260 B
X8541 SIMPLEX-LCOB-150H31-115/230 1.5 1 115/230 LCOB 30 6 42x20x40 270 B
X8542 SIMPLEX-LCOB-150H33-208 1.5 3 208 LCOB 30 6 42x20x40 270 B
X8543 SIMPLEX-LCOB-150H33-230 1.5 3 230 LCOB 30 6 42x20x40 270 B
X8544 SIMPLEX-LCOB-150H33-460 1.5 3 460 LCOB 30 6 42x20x40 270 B
X8545 SIMPLEX-LCOB-200H31-230 2 1 230 LCOB 30 8 42x20x40 285 B
X8546 SIMPLEX-LCOB-200H33-208 2 3 208 LCOB 30 8 42x20x40 285 B
X8547 SIMPLEX-LCOB-200H33-230 2 3 230 LCOB 30 8 42x20x40 285 B
X8548 SIMPLEX-LCOB-200H33-460 2 3 460 LCOB 30 8 42x20x40 285 B

COMPRESSORS | 15

GAS & Diesel Air Compressors 

Part # Model HP CFM @ 175 PSI Tank L x W x H Start Weight
E1220 EC10DK 9.8 16 30 gal 45x21x47 12V and Recoil 525 lbs.
E1218 EC14GK 14 21 30 gal 45x21x47 12 Volt 525 lbs.
K2075 **K20GH 20 44 60 gal 54x26x52 12 Volt 859 lbs.
E1215 EC13GH 13 21 30 gal 45x21x47 12V and Recoil 525 lbs.
K2078 K13GH 13 24 30 gal 45x21x47 12V and Recoil 525 lbs.
K2068 K14GK 14 24 30 gal 45x21x47 12 Volt 525 lbs.

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

COMPRESSORS | 16

Small Portable Air Compressors

Part # Model HP Type – Volt Stage – Cylinder CFM Tank Weight
U1221 UC5540H-UH30 5.5 Honda 1 S / 2 Cyl 8.8 @ 100 PSI 10 Gal Twin 225 lbs.
U1015 U2P2 2 115V 1 S / 2 Cyl 7 @ 100 PSI 10 Gal Twin 225 lbs.
U1200 UC2008 2 115 Single / 1 Cyl 5 @100 PSI 3.4 Gal Pancake 48 lbs.
U1017 UH20 2 115 / 230 Single / 2 Cyl 6 @ 90 PSI 20 Gal Horizontal 225 lbs.

HIGH TEMP DRYERS | 17

High Temp Dryers

Precision Cooling Unit

Part # Model CFM NPT For HP Volt Amps Weight H x W x D
F6301 DHT-20 20 0.5” 1-5 115/1 7.1 95 lbs. 15 x 16 x 16
F6302 DHT-40 40 1” 7.5-10 115/1 12.4 125 lbs. 22 x 24 x 18
F6303 DHT-50 50 1” 15 115/1 12.4 140 lbs. 22 x 24 x 18
F6304 DHT-75 75 1” 20 115/1 12.4 240 lbs. 22 x 24 x 18
F6305 DHT-100 100 1-1/2” 25 115/1 17.7 330 lbs. 30 x 36 x 25
F6306 DHT-125 125 1-1/2” 25-30 230/1 17.7 360 lbs. 30 x 36 x 25

*Above ratings are based upon 100 PSI inlet pressure at 100° ambient. Ratings are increased by 20% if used at 170 PSI. Add 50 lbs. for ship weight. All units must ship via freight carrier only. Two Year Limited Warranty on all Aircel Refrigerated Dryers. 1 Year Labor and 2 years on Parts

REFRIGERATED DRYER | 18

Refrigerated Dryer

Precision Drying Unit

Part # Model CFM NPT HP Range Volt/Phase Amps Dryer HP Weight H x W x D
F6500 ACS-10 10 1/2” 3 115/1 6 1/4 71 lbs. 15x16x16
F6510 ACS-15 15 1/2” 5 115/1 6 1/4 74 lbs. 15x16x16
F6520 ACS-25 25 1/2” 7.5 115/1 6 1/4 76 lbs. 15x16x16
F6530 ACS-40 40 3/4” 10 115/1 7 1/4 78 lbs. 15x16x16
F6540 ACS-50 50 3/4” 15 115/1 7 1/4 80 lbs. 15x16x16
F6550 ACS-60 60 3/4” 15-20 115/1 11 1/3 102 lbs. 15x16x16
F6560 ACS-75 75 1” 20 115/1 11 1/3 124 lbs. 22x24x18
F6570 ACS-100 100 1” 25-30 115/1 16 1/2 138 lbs. 22x24x18
F6580 ACS-125 125 1” 30 115/1 21 3/4 156 lbs. 22x24x18
F6590 ACS-150 150 1” 40 115/1 21 3/4 162 lbs. 22x24x18
F6600 ACS-200 200 1-1/2” 50 230/1 12 1 240 lbs. 30x36x25
F6610 ACS-250 250 1-1/2” 50-60 460/3 5 1.25 332 lbs. 30x36x25
F6620 ACS-300 300 2” 60-75 460/3 6 1.5 345 lbs. 30x36x25
F6630 ACS-400 400 2” 75-100 460/3 9 2 567 lbs. 45x34x45
F6640 ACS-500 500 2” 100-125 460/3 12 3 582 lbs. 45x34x45

*All Models 60 Hz / Add Approx.50 lbs for crated weight. / CFM rating based upon CAGI ADF 100 @ 100psig, 100 ° F ambient, and PDP of 38 ° F.
*Optional Transformer may be used to convert voltage & phase for models ACS-10 to ACS-200. Two legs of existing 460 volt three phase service are connected to Optional Transformer, creating a single phase 115 or 230 volt output. Actual packed shipping weights may vary. Two Year Limited Warranty on all Aircel Refrigerated Dryers. 1 Year Labor and 2 Years on Parts.

DESICCANT DRYERS | 19

Dryer Stand

Includes Stand with a 3 Valve Bypass

Features

  • Allows for maintenance of equipment without service interruption
  • Compact manifold and stand saves space, protect equipment from
    ground contact, corrosion, workspace traffic, etc.

*Dryer and Filters Sold Separately

Part # Inlet Size
F6325 1/2”- 3/4”
F6330 1”- 1-1/2”
F6335 2” – 2-1/2”

Dessicant Dryers

AHLD-E

Features

  • 10 Year Exhaust Valve Warranty
  • Includes Mounted Filters
  • Other Sizes Available
  • From 4 CFM to 5000 CFM

Call for Pricing & Specs

Desiccant Activated Alumina

Part # Bead Size Qty
B011 1/8 bead 50 lb. Bag
B012 3/16 bead 50 lb. Bag

Dessicant Dryer System

  • Rated at -40°F Dew Point
  • Pre-Filter Included
  • After-Filter Included
  • Twin Vessel System
  • 115 Volt controls
  • Conforms to CAGI
  • 3/16” Desiccant
  • ASME Coded
  • Butterfly Valves
  • Electronic Controller

AMD Dryers

Features

  • Modular Dryers 4-65 CFM Purification System
  • Includes Prefilter, Dryer, Afterfilter, Control System, Automatic Drain and Silencer
  • Up to -40°F Dewpoint Performance

Call for Pricing & Specs

AFTERCOOLERS | 20

Air Cooled Aftercoolers

Part # Model MAX CFM
@ 200° F
MAX CFM
@ 200° F
Inlet NPT Flow Motor Volt-Phase HxWxD Weight
F5005 UPA-35 43 35 1/2” H or V 1/12 HP ODP 115/230 1Ø 21.89-20.38-9.58 27 lbs.
F5010 UPA-50 72 50 1” H or V 1/12 HP ODP 115/230 1Ø 42.18-26.11-20.93 61 lbs.
F5015 UPA-100 125 100 1.5” H or V 1/12 HP ODP 115/230 1Ø 42.18-26.11-20.93 67 lbs.
F5020 AA-150 172 150 1.5” H 1/4 HP ODP 115/230 1Ø 50.50-43.50-14.75 145 lbs.
F5025 AHP-400 430 400 2” V 1 HP TEFC 208/230/460 3Ø 19.95-22.45-17.48 120 lbs.
F5000 AHP-725 760 725 2” V 1 HP TEFC 208/230/460 3Ø 24.37-30.17-20.86 170 lbs.

* CFM ratings are based upon a 15 °F approach over ambient air temperatures. * Ship weights are approximate.

AFTERCOOLERS / BLOWERS | 21

Beltguard Aftercoolers

Part # Model CFM HP WxH NPT
F6034 BGAC-5 20 5 20”x8” 1”
F6031 BGAC-10 35 10 20”x12” 1”
F6017 BGAC-25 75 25 26”x18” 1”
F6049 BGAC-30 100 30 25”x24” 1.25”

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

Part # Model CFM HP WxH NPT
F6460 BGC-18 18 5 20”x6” 3/4”
F6465 BGC-35 35 7.5-10 20”x8” 1”
F6470 BGC-50 50 15 20”x12” 1”
F6475 BGC-100 100 20-25 26”x18” 1”
F6480 BGC-125 125 30 25”x24” 1.25”

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

AIR MUFFLERS | 22

Beltguard Aftercoolers

Part# Model NPT Width Length Weight Flow CF
S4000 M01 1/8” 1-7/8” 3-1/8” 0.2 44
S4001 M02 1/4” 1-7/8” 4-3/8” 0.25 84
S4002 M00 3/8” 2-5/8″ 5-1/8″ 0.5 192
S4003 M05 1/2” 3-1/8” 6” 0.75 256
S4004 M07 3/4” 3-3/8” 7-1/4” 1 544
S4005 M10 1” 3-7/8” 8-3/4” 1.3 800
S4006 M12 1 1/4” 3-7/8” 8-3/4” 1.35 1360
S4007 M15 1 1/2” 5-1/4” 13-1/2” 3.2 2080
S4008 M20 2” 5-1/4” 18-7/8” 4.1 3200
S4009 M30 3” 7” 22-7/8” 12.7 7200
S4025 X10 1” 3-7/8” 8-3/4” 1.68 800
S4026 X12 1 1/4” 3-7/8” 8-3/4” 1.77 1360
S4027 X15 1 1/2” 5-1/4” 13-1/2” 3.63 2080
S4028 X20 2” 5-1/4” 18-7/8” 4.6 3200
S4029 X30 3” 7” 22-7/8” 14.86 7200

*HU models indicate head unloading feature for constant run (dual control) or engine applications. If HU is not required, do not connect during installation. No modification required. HU = TVX designation. Bolt Dimensions >>

SEPARATORS | 23

AWS Centrifugal Separators

Part # Model CFM NPT
S7920 AWS25 25 1/4”
S7921 AWS35 35 3/8”
S7922 AWS50 50 1/2”
S7923 AWS70 70 1/2”
S7924 AWS125 125 3/4”
S7925 AWS175 175 1”
S7926 AWS280 280 1.25”
S7928 AWS400 400 1.5”
S7929 AWS700 700 2”
S7930 AWS850 850 2.5”
S7931 AWS1500 1500 3”

Cast-Iron Centrifugal Separators

Part # MAX. CFM @ 100 PSI Weight NPT
S3001 155 25 1”
S3002 345 44 1 1/2”
S3003 620 47 2”
S3004 945 89 2 1/2”
S3005 1400 125 3”
S3006 DRAIN REPAIR KIT- FITS ALL ABOVE

SEPARATORS | 24

Part # Model CFM HxWxD Weight Inlet Outlet Media Refill
S8380 SEP 60 ST 60 9x6x6 3 1/4” 3/8” na
S8381 SEP 120 ST 120 20x9x10 6 1/2” 3/4” S8388
S8382 SEP 360 ST 360 26x14x11 8 1/2” 3/4” S8389
S8383 SEP 900 ST 900 39x17x20 33 1/2” 3/4” S8390
S8387 SEP 1250 ST 1250 39x18x20 40 1/2” 3/4” S8395
S8384 SEP 1800 ST 1800 39x39x21 69 1/2” 3/4” S8391
S8394 SEP 2500 ST 2500 39x43x22 84 1/2” 3/4” S8396
S8385 SEP 3500 ST 3500 39x39x28 319 3/4” 3/4” S8392
S8386 SEP 7000 ST 7000 39x43x43 467 3/4” 3/4” S8393

TANKS | 25

Part # Size Config. PSI Description Total H Barrel Top Plate Weight
i2015 8 gal twin 150 w/o wheels/non-code 12.75 36 x 18 24 x 9 55 lbs.
i2020 20 gal horiz 150 w/o wheels/non-code 20 33 x 14 18 x 7.5 63 lbs.
i2031 30 gal horiz 200 big top plate 20 38 x 16 34 x 10 140 lbs.
i2035 30 gal vert 200 std top plate 39.75 38 x 16 23 x 9 99 lbs.
i2028 60 gal horiz 200 std top plate 24.75 48 x 20 36 x 12 177 lbs.
i2026 60 gal vert 200 std top plate 51.75 48 x 20 36 x 12 173 lbs.
i2012 80 gal horiz 200 std top plate 24.75 63 x 20 36 x 12 230 lbs.
i2110 80 gal HD vert 200 Heavy Duty top plate 51 46 x 24 36 x 12 350 lbs.
i2025 80 gal vert 200 std top plate 51 46 x 24 36 x 12 269 lbs.
i2021 120 gal horiz 200 std top plate 29.25 69 x 24 44 x 16 343 lbs.
i2019 120 gal vert 200 std top plate 56 46 x 30 39 x 15 432 lbs.
i2014 240 gal horiz 200 std top plate 36 84 x 30 44 x 16 658 lbs.
i2200 240 Gallon horz- GHT 200 no top plate 35 30 none 759
i2013 120 gal vert/remote 200 no top plate 77 + 3 69 x 24 none 301 lbs.
i2029 240 gal vert/remote 200 no top plate 92 + 3 84 x 30 none 620 lbs.
i2036 400 gal vert/remote 165 no top plate 101 + 3 93 x 36 none 728 lbs.
i2081 660 gal vert/remote 150 no top plate 128 120 x 42 none 1560 lbs.
i2080 1060 gal vert/remote 150 no top plate 152 144 x 48 none 2195 lbs.
i2037 For Small Pumps BASE PLATE 3.75 NA 34 x 10 50 lbs.
i2038 For 5 to 10 HP Pumps BASE PLATE 4 NA 36 x 12 75 lbs.
i2039 For up to 25 HP Pumps BASE PLATE 5 NA 44 x 16 100 lbs.

*Tanks not available for sale in California and Massachusetts / 30 – 1060 gal tanks are ASME coded / Scuffing and blemishes are to be expected / Color May Very

TANKS / STICKERS | 26

Part # Item
i2008 Tank with Fittings
i2009 Bare Tank
i2007 Safety Stickers

*i2008 is shipped in kit form, not assembled

Part # Type Size
W1911 Recip 8.5”x14”
W1915 Rotary 8.5”x14”
W1925 Maint. Log 6.5”x8.5”

FILTERS | 27

Part # Model CFM Stage Size Replacement Element* Part #
S7900 AF20-C-AF1 20 1st 1/4” A20AF1E S7850
S7901 AF30-C-AF1 30 1st 3/8” A30AF1E S7851
S7902 AF65-C-AF1 65 1st 1/2” A65AF1E S7852
S7903 AF75-C-AF1 75 1st 3/4” A75AF1E S7853
S7904 AF100-C-AF1 100 1st 1” A100AF1E S7854
S7905 AF150-C-AF1 150 1st 1” A150AF1E S7855
S7906 AF225-C-AF1 225 1st 1.5” A225AF1E S7856
S7907 AF300-C-AF1 300 1st 1.5” A300AF1E S7857
S7908 AF450-C-AF1 450 1st 2” A450AF1E S7858
S7909 AF650-C-AF1 650 1st 2” A650AF1E S7859
S7910 AF1000-C-AF1 1000 1st 3” A1000AF1E S7860
S7911 AF1250-C-AF1 1250 1st 3” A1250AF1E S7861
S7912 AF1500-C-AF1 1500 1st 3” A1500AF1E S7862
S7950 AF20-C-AF01 20 2nd 1/4” A20AF01E S7880
S7951 AF30-C-AF01 30 2nd 3/8” A30AF01E S7881
S7952 AF65-C-AF01 65 2nd 1/2” A65AF01E S7882
S7953 AF75-C-AF01 75 2nd 3/4” A75AF01E S7883
S7954 AF100-C-AF01 100 2nd 1” A100AF01E S7884
S7955 AF150-C-AF01 150 2nd 1” A150AF01E S7885
S7956 AF225-C-AF01 225 2nd 1.5” A225AF01E S7886
S7957 AF300-C-AF01 300 2nd 1.5” A300AF01E S7887
S7958 AF450-C-AF01 450 2nd 2” A450AF01E S7888
S7959 AF650-C-AF01 650 2nd 2” A650AF01E S7889
S7960 AF1000-C-AF01 1000 2nd 3” A1000AF01E S7890
S7961 AF1250-C-AF01 1250 2nd 3” A1250AF01E S7891
S7962 AF1500-C-AF01 1500 2nd 3” A1500AF01E S7892
S7840 Replacement Float Drain ADV16/DVAS16

All Filters maximum ratings: 232 PSI, 248 degree F. *Element is included in all filter housings.

 FILTERS | 28

Air Treatment & Accessories

Air Filters – by Watts

Part # Watts # Size Bowl CFM
S1450 F602-024A 06F14AC 1/4” zinc 4.4 oz. 53
S1451 F602-034A 06F24BC 3/8” zinc 4.4 oz. 80
S1452 F602-044A 06F34AC 1/2” zinc 4.4 oz. 85
S1111 F602-06WJ 3/4” zinc 16 oz. 220
S1130 F602-08WJ 1” zinc 16 oz. 240
S1116 F602-12WJ 1 1/2” zinc 16 oz. 450
S1102 F602-16WJ 2” zinc 16 oz. 1200

 

Coalescing Filters – by Watts

Part # WATTS # Size Bowl CFM
S1453 F701-024E 11F14EC 1/4” zinc 4.4 oz. 45
S1454 F701-034E 11F27EC 3/8” zinc 4.4 oz. 48
S1455 F701-044E 11F34EC 1/2” zinc 4.4 oz. 65
S1119 F701-06E3P 3/4” alum 32 oz. 158
S1103 F701-08E3P 1” alum 32 oz. 158
S1089 F701-12E3G 1 1/2” steel 205 oz. 250
S1053 F701-16E3G 2” steel 205 oz. 395

Float Drains – Watts

Part # Auto Drain Type Fits Year
S1820 PS506P Float 1/4” to 1/2” 2013 and Forward
S1083 SA605MD Float 1/4” to 1/2” 2012 and Before
S1083 SA605MD Float 3/4” & up All Years

FILTERS | 29

Regulators –  byWatts

Part # WATTS# CFM Size
S1113 R119-02C 100 1/4”
S1109 R119-03C 110 3/8”
S1095 R119-04C 150 1/2”
S1121 R119-06C 300 3/4”
S1108 R119-08C 400 1”
S1127 R119-12C 500 1 1/2”
S1131 R119-16J 1800 2”
S1101 R119-20J 1800 2 1/2”

*Note: 2” and 2 1/2” Regulators are pilot operated, you must have a 1/4” regulator to work in conjunction with it. Above Regulators 0-125 PSI Range.

Regulators –  byWatts

Part # WATTS# Size Bowl CFM
S1456 L606-024B 16L14BE 1/4” zinc 2.6 oz. 40
S1457 L606-034B 16L24BE 3/8” zinc 2.6 oz. 60
S1458 L606-044B 16L34BE 1/2” zinc 2.6 oz. 90
S1118 L606-06W 3/4” zinc 16 oz. 325
S1128 L606-08W 1” zinc 16 oz. 325
S1129 L606-12W 1 1/2” zinc 16 oz. 400

Replacement Elements –  by Watts

Part # Watts # Type Fits Year
S1821 PS701P Filter 1/4” to 1/2” 2013 and Forward
S1802 EK602B Filter 3/4” to 1-1/2” All Years
S1803 EK602G Filter 2” to 2-1/2” All Years
S1811 EKF20A Filter QIX only All Years
S1810 EK504Y Mini-Filter 1/4” All Years
S1809 EKF10Y Filter/Reg 1/2” (B11-04) All Years
S1822 PS724P Coalescor 1/4” to 1/2” 2013 and Forward
S1805 F701-C3-0773 Coalescor 3/4” to 1” All Years
S1806 F701-C3-0775 Coalescor 1-1/4” to 1-1/2” All Years
S1807 F701-C3-0777 Coalescor 2” All Years
S1808 F701-C3-0778 Coalescor 2-1/2” All Years

FILTERS | 30

Replacement Elements –  by Watts

Regulator: 300 PSI max. Incoming pressure 0-125 PSI Regulated pressure 1/8” gauge required. See page 58 for S2805 gauge.
Filter/Regulator: Polycarbonate Bowls 150 PSI Max

Part # Type WATTS# Size CFM / Bowl
S6104 Regulator R374-02C 1/4” 10 cfm
S6102 Filter F504-02AH 1/4” 22 cfm – 1 oz.
S6101 Filter / Regulator B548-02AHC 1/4” 12 cfm – 1 oz.
S6103 Lubricator L508-02AM2 1/4” 20 cfm – 1 oz.
S6110 Coalescing Disposable 02FA06A 1/4” slip 3.5 cfm

 

Toilet Paper Filters – by Motor Guard

Motor guard Toilet Paper Filters effectively remove oil aerosols, condensed moisture and sub-micronic particles from compressed air and vacuum lines. Designed for use with 1/4” or 1/2” NPT pipe connections for pneumatic tools, instruments, controls, and plasma cutting system applications. Economical one step method for hobby type applications.

Part # Model Mounting Kit
S1135 M30 imcluded
S1136 M60 N / A

Toilet Paper Filters – by Motor Guard

Part # Model
S1160 Replacement Filters – 4 Pack

STARTERS | 31

Electrical

Replacement Starters

*All DP Starters on this page include Enclosure, Contactor and Overload. LE Starters include Enclosure & Contactor

DP Heaters & LE Adjustable Overload
Sold Separately

Part # Motor HP Motor & Coil Voltage* Phase Model Contact Amps Plus (Qty) (Required) Heater Type Part #
W4051 5 208 3 DP23-9 25 3 B28 W4473
W4051 5 230 3 DP23-9 25 3 B25 W4462
W4452 5 460 3 DP23-6 25 3 B11.5 W4460
W4043  7 1/2 208 3 DP43-9  40 3 B45  W4466
W4051 7 1/2 230 3 DP23-9 25 3 B36 W4464
W4452 7 1/2 460 3 DP23-6 25 3 B17.5 W4461
W4043 10 208 3 DP43-9 40 3 B56 W4474
W4043 10 230 3 DP43-9 40 3 B45 W4466
W4452 10 460 3 DP23-6 25 3 B25 W4462
W4048 15 208 3 DP53-9 50 3 B79 W4469
W4048 15 230 3 DP53-9 50 3 B70 W4468
W4450 15 460 3 DP43-6 40 3 B36 W4464
W4525 20 208 3 LE1D65 65 1 LRD365 W4406
W4526 20 230 3 LE1D65 65 1 LRD365 W4406
W4451 20 460 3 DP53-6 50 3 B45 W4466
W4527 25 208 3 LE1D80 80 1 LRD3363 W4415
W4528 25 230 3 LE1D80 80 1 LRD3363 W4415
W4451 25 460 3 DP53-6 50 3 B56 W4474
W4044 5 230 1 DP32-9 30 1 B36 W4464
W4046 7 1/2 230 1 DP42-9 40 1 B56 W4474
W4065 10 230 1 DP52-9 50 1 B79 W4469
W4318 Auxiliary Contact N.O. / N.C. for DP23,32,42,43 starters.
W4315 Auxiliary Contact N.O. / N.C. for LE1D65&80 starters.
AUX-11 Auxiliary Contact N.O / N.C. for DP52 & 53

** For 1/2 HP to 3 HP (3PH Motors), Use DP23 Starter and specify Motor HP & Voltage for Heaters.
*No returns are allowed on electrical parts.

STARTERS | 32

Electrical

NEMA Starters – 3 Phase

Part # Model Size Amp Rating Max HP Range @ Voltage Coil V. Heater Type
W4075 SBG2 0 18 3-200/3-230/5-460 120 B
W4076 SCG3 1 27 7.5-200/7.5-230/10-460 120 B
W4077 SDG1 2 45 10-200/15-230/25-460 120 B
W4045 SDG1 3 90 25-200/30-230/50-460 120 CC
W4042 SDG1 4 135 40-200/50-230/100-460 120 CC
W4049 SDG1 5 270 75-200/100-230/200-460 120 B

* All NEMA Starters include Nema 1 general purpose enclosures and are equipped with one N.O. auxiliary contact. Additional Aux contacts may be added.
* All NEMA starters are 120V Coils. Other Coil voltages available on Request. You MUST specify voltage when ordering.

DP Starter Parts

Dual Control

Starter Type Start-Stop H-O-A Bracket Kit
DP 23,32,42,43 W4111 W4121 W4201
DP 52,53 W4111 W4121
NEMA Size 0-3 W4115 W4125
NEMA Size 4-5 W4116 W4126

*No returns are allowed on electrical parts.

AUX Contacts

Part # Type
AUX-10 1N.O.
AUX-01 1N.C.
AUX-11 1N.O. & 1N.C.
AUX-20 2N.O.
AUX-N6 1N.O.
AUX-N8 1N.O. & 1N.C.

Heaters

Part # Starter Type
HEAT-B DP-32,42,52,23,43,53 / NEMA-0,1,2,5
HEAT-CC DP-63,73,93 / NEMA-3,4

Overload Contact

Part # Type
W4317 Overload Sw

CONTACTORS | 33

*AUX Contacts for IEC Pg 35
*All contactors are 3PH with 120 volt coils

IEC Contactors

Part # Contactor HP Volt Use Overload
W4300 IEC18D 5 208 LRD22
W4300 IEC18D 5 230 LRD21
W4300 IEC18D 5 460 LRD14
W4301 IEC25D 7.5 208 LRD32
W4301 IEC25D 7.5 230 LRD22
W4301 IEC25D 7.5 460 LRD16
W4303 IEC40DA 10 208 LRD340
W4302 IEC32D 10 230 LRD32
W4300 IEC18D 10 460 LRD21
W4305 IEC50DA 15 208 LRD365
W4304 IEC50DA 15 230 LRD350
W4301 IEC25D 15 460 LRD22
W4305 IEC65DA 20 208 LRD365
W4305 IEC65DA 20 230 LRD365
W4302 IEC32D 20 460 LRD32
W4306 IEC80D 25 208 LRD3363
W4306 IEC80D 25 230 LRD3363
W4303 IEC40DA 25 460 LRD340
W4307 IEC115D 30 208 LRD4365
W4306 IEC80D 30 230 LRD3365
W4304 IEC50DA 30 460 LRD350
W4308 IEC150D 40 208 LRD4369
W4307 IEC115D 40 230 LRD4367
W4305 IEC65DA 40 460 LRD365
W4311 IEC265F 50 208 LR9F5371
W4308 IEC150D 50 230 LRD4369
W4306 IEC80D 50 460 LRD3363
W4311 IEC265F 75 208 LR9F7375
W4311 IEC265F 75 230 LR9F5371
W4307 IEC115D 75 460 LRD4365
W4312 IEC330F 100 208 LR9F7375
W4311 IEC265F 100 230 LR9F7375
W4308 IEC150D 100 460 LRD4369

*No returns are allowed on electrical parts.

OVERLOADS | 34

*AUX Contacts for IEC Pg 35
*All contactors are 3PH with 120 volt coils

IEC Overloads

Part # Overload Amp Range
W4400 LRD10 4-6
W4413 LRD14 7-10
W4414 LRD16 9-13
W4401 LRD21 12-18
W4402 LRD22 16-24
W4418 LRD32 23-32
W4403 LRD332 23-32
W4404 LRD340 30-40
W4405 LRD350 37-50
W4406 LRD365 48-65
W4417 LRD3361 55-70
W4415 LRD3363 63-80
W4416 LRD3365 80-104
W4479 LRD4365 80-104
W4407 LRD4367 95-120
W4408 LRD4369 110-140
W4409 LR9F5369 90-150
W4410 LR9F5371 132-220
W4411 LR9F7375 200-330
W4412 LR9F7369 300-500

*No returns are allowed on electrical parts.

Phase Monitor

Protects 3 Phase Motors from Loss of Phase , Low Voltage, High Voltage, Voltage Imbalance, Phase Reversal, Rapid Cycling

Features

• Made in the USA – UL listed
• CE Compliant
• Line Voltage :190 to 480 VAC 50/60 Hz
• Control Voltage: 24-120-240 VAC
• Simple Installation
• Opens Control Circuit When Fault is Detected
• Adjustable Parameters

Part # Model
W4390 Phase Monitor 460

ELECTRICAL PARTS | 35

Auxilary Contacts IEC NO/NC

Part # Item
W4315 Auxiliary Contact Switch D line.
W4316 Auxiliary Contact Switch F line.

Start / Stop Switch

Part # Item
W4320 Start Switch – 7/8” mount
W4325 Stop Switch – 7/8” mount
W4330 Start “and” Stop Switch

Control Transformers

Part # Model VA Rating Primary VoltageRange Secondary Voltage
W4511 PH100 VA 100 220-240 / 440-480 110/115/120
W4512 E200 VA 200 220-240 / 440-480 110/115/120

Control Trans. – Optional Accessories

Part # Fuse For Use With Order Qty
W4515 ATMR1 Primary VA100 at 480V Order 2
W4514 ATMR2 Primary VA100 at 240V Order 2
W4514 ATMR2 Primary VA200 at 480V Order 2
W4517 ATMR4 Primary VA200 at 240V Order 2
W4516 ATMR5 Primary VA250 at 208V Order 2
W4520 GGC1.5 Secondary VA 100 Order 1
W4521 GGC3 Secondary VA 200 Order 1
W4522 GGC4 Secondary VA 250 Order 1

Control Trans. – Optional Accessories

Part # Fuse Block For
W4518 PFK1 2 Pole Primary
W4519 FB2 1 Pole Secondary

CAPACITORS | 36

Capacitors

Part # Model # Type Shape / Case Diameter (In.) Height (In.) MFD Volt
J6400 PMJ400 Start round/phenolic 1-7/16 3-3/8 400 – 480 110-125
J6405 PMJ540 Start round/phenolic 1-13/16 4-3/8 540 – 648 110-125
J6410 PMJ590 Start round/phenolic 1-13/16 4-3/8 590 – 708 110-125
J6412 PMJ645 Start round/phenolic 1-13/16 4-3/8 645 – 774 110-125
J6475 PMJ1000 Start round/phenolic 2-1/16 4-3/8 1000-1200 110-125
J6480 PMJ1290 Start round/phenolic 2-1/16 4-3/8 1290-1548 110-125
J6415 PTMJ161 Start round/phenolic 2-1/16 3-3/8 161 -193 220-250
J6420 PTMJ216 Start round/phenolic 2-1/16 3-3/8 216 – 259 220-250
J6425 PTMJ270 Start round/phenolic 2-1/16 3-3/8 270 – 324 220-250
J6430 PTMJ400 Start round/phenolic 2-1/16 4-3/8 400 – 480 220-250
J6435 PTMJ430 Start round/phenolic 2-9/16 4-3/8 430 – 516 220-250
J6438 PTMJ630 Start round/phenolic 2-9/16 4-3/8 630 – 750 220-250
J6440 TRC20 Run round/metal 1-3/4 3-3/16 20 370
J6445 TRC25 Run round/metal 1-3/4 3-1/2 25 370
J6450 TRC30 Run round/metal 2 4-1/8 30 370
J6455 TRC40 Run round/metal 2 4-1/8 40 370
J6460 TRC50 Run round/metal 2 4-3/4 50 370
J6465 TRC60 Run round/metal 2-3/8 4-3/4 60 370
J6470 TRCF20 Run round/metal 1-3/4 3-3/16 20 440

*Single phase motors often use start and run capacitors. If your motor trips the overload or overheats, the run capacitor may be suspect. If your motor hums but will not start, the start capacitor could be suspect. However, hard starts may be caused by a defective tank check valve or unloader. Disconnect power before servicing equipment. Capacitors should always be discharged before removal. All electrical repair and testing should be performed by a qualified technician.

CAPACITORS | 37

Alternators

Part # Model
W4350 47AB10AF 120V
W4351 47AB10AD 200V
W4352 47AB10AG 230V
W4353 47AB10AH 460V
W4360 ARA-120-ACA 120V
W4361 ARA-240-ACA 240V
W4380 PJR110   110V
W4385 SOCKET ARA/PJR
W4365 CA2-G7 120V
W4366 CA2-M7 208-240V
W4368 CA2-T7 460V
W4367 CA2 ENCLOSURE

PRESSURE SWITCH | 38

Pressure Switches

Part # Model Amp Brand Setting Range DIFFERENTIAL Ports FPT Port Size Inch Unloader Unloader Ftg Size Auto / Off Switch
U1120 LF10-4H-125 20 Lefoo 95/125 35-150 30-40 4 1/4 Yes 1/4 Yes
U1140 LF10-L-4H-125 20 Lefoo 95/125 35-150 30-40 4 1/4 Yes 1/4 Yes
U1142* LF10-L-4H-mm-125 20 Lefoo 95/125 35-150 30-40 4 1/4 Yes 6 MM Yes
U1128 LF10H-1H-125 20 Lefoo 95/125 35-150 30-40 1 1/4 Yes 1/4 Yes
U1125 LF10-1H-175 20 Lefoo 140/175 50-175 30-50 1 1/4 Yes 1/4 Yes
U1126 LF10-4H-175 20 Lefoo 140/175 50-175 30-50 4 1/4 Yes 1/4 Yes
U1127* LF10-1H-175 20 Lefoo 140/175 50-175 30-50 1 1/4 Yes 1/4 No
U1130 LF17-1H-175 24 Lefoo 140/175 40-250 30-65 1 1/4 Yes 1/4 No
W4053 9013FHG-12J52 20 Square D 95/125 70-150 30 1 1/4 No No No
W4055 9013FHG-12J52X 20 Square D 95/125 70-150 30 1 1/4 Yes 1/4 No
W4203 9013FHG-12J52MIX 20 Square D 95/125 70-150 30 1 1/4 Yes 1/4 Yes
W4204 9013FHG-14J52MIX 20 Square D 95/125 70-150 30 4 1/4 Yes 1/4 Yes
W4056 9013FHG-42J59 20 Square D 140/175 100-200 40 1 1/4 No No No
W4052 9013FHG-42J59X 20 Square D 140/175 100-200 40 1 1/4 Yes 1/4 No
W4057 9013GHG-6J62 16 Square D 140/175 80-250 24-45 1 3/8 No No No
W4054 9013GHG-6J62X 16 Square D 140/175 80-250 24-45 1 3/8 Yes 1/4 No
W4059 9013GHB-2J53X* 16 Square D 100/125 100-150 25-45 1 1/4 Yes 1/4 No
W4060 9013GHR-2J57X** 16 Square D 125/150 65-200 30-50 1 1/4 Yes 1/4 No
W4061 9016GAW-1 10 Square D Vacuum 0-28.7”Hg 0.8-9”Hg 1 1/4 No No No
W4030 9012-GNG-5*** 10 Square D Not set 3-150 4.2-22 1 1/4 No No No
W4031 MIRCRO SW ms Square D Replacement Micro Switch for 9012-GNG-5
W4039 69HAU3 24 Hubbell – Furnas 30/40 15-60 7-15 1 3/8 Yes 1/4 No
W4080 69JF7Y 20 Hubbell – Furnas 95/125 50-145 25-33 1 1/4 Yes 1/4 No
W4081 69JF7LY2C 20 Hubbell – Furnas 95/125 50-145 25-33 4 1/4 Yes 1/4 Yes
W4083 69HAU1 24 Hubbell – Furnas 115/150 40-250 35-60 1 3/8 Yes 1/4 No
W4082 69JF9Y 20 Hubbell – Furnas 140/175 100-175 30-40 1 1/4 Yes 1/4 No
W4084 69JG9LY2C 24 Hubbell – Furnas 140/175 100-175 30-40 4 1/4 Yes 1/4 Yes

* W4059 is suitable for Rain exposure.
**W4060 has Explosion Proof enclosure.
***W4030 is a suitable replacement for AB-836-C7A
*No returns are allowed on electrical parts.

ELECTRIC MOTORS | 39

Part # HP Weight Frame RPM Shaft Phase Volt
J5012 1 38 lbs. 143T 1725 7/8 single 115/208-230
J5016 1.5 39 lbs. G145T 1725 7/8 single 115/208-230
J5020 2 47 lbs. 145T 1725 7/8 single 115/208-230
J5014 3 75 lbs. 184T 1725 1 1/8 single 230
J5027 5 82 lbs. 184T 1725 1 1/8 single 208-230
J5043 7.5 131 lbs. 215T 1725 1 3/8 single 230
J5045 10 166 lbs. 215TZ 1725 1 3/8 single 230
J5048 3 63 lbs. 182T 1760 1 1/8 3 208-230/460
J5049 5 72 lbs. 184T 1760 1 1/8 3 208-230/460
J5053 7.5 154 lbs. 213T 1760 1 3/8 3 208-230/460
J5054 10 174 lbs. 215T 1760 1 3/8 3 208-230/460
J5052 15 275 lbs. 254T 1770 1 5/8 3 208-230/460
J5050 20 312 lbs. 256T 1770 1 5/8 3 208-230/460
J5051 25 356 lbs. 284T 1770 1 7/8 3 208-230/460

*No returns are allowed on electrical parts.

Utility Compressor Motors

Part # HP Weight Frame RPM Shaft Amp-Volt
J5039 SPL 2 27 lbs. 56 3450 5/8 15A / 7.5A 115 – 230 V
J5041 2 27 lbs. 56 3450 5/8 15A / 115V
J5042 3 30 lbs. 56 3450 5/8 15A / 115V
J5029 5 40 lbs. 56 3450 5/8 15A / 230V

*No returns are allowed on electrical parts.

ENGINES | 40

Engines – Gas & Deisel

Engines – Gas & Deisel

Part # Engine Model # HP Start Weight
M5043 Kohler Diesel KD440-2001B 10 12 Volt Electric with Recoil 102 lbs.
M5042 Kohler CH440ST 14 12 Volt Electric with Recoil 110 lbs.
M5550 Honda GX160-UTIQX2 5.5 Recoil Only -No starter 34 lbs.
M5035 Honda GX390-UIQAE2 13 12 Volt Electric with Recoil 75 lbs.
M5039 Honda GX390-UIQA2 13 Recoil Only -No starter 75 lbs.
M5037 Honda GX630-RQAF1 20 12 Volt Electric 108 lbs.
M5041 Honda 5 gallon fuel tank & carbon canister kit for GX630 25 lbs.
I2046 Honda Mounting Bracket Set for 5 Gallon Tank Kit M5041
I2047 Honda Stainless Steel Strap for Fuel Tank Bracket Set (order 2)

*Horsepower ratings are approximate values.

ENGINE PARTS | 41

Engine Idlers

Engine Idlers

Part # Model HP
M5525 Honda GX390 11-13
M5527 Honda GX620 20
M5545 Honda GX630 (new) 20
M5531 Kohler CH440ST (new) 14
M5521 Kohler Command 11, 13, 15
M5512 Kohler K Series & Magnum 10, 12
M5604 KD Complete Idler Kit 10

Bullwhip Idlers

Part # Type Length Application
M5540 L-36 Large Cylinder 36” Fits 8HP & up
M5541 S-36 Small Cylinder 36” Fits 5-6 HP
M5542 L-24 Large Cylinder 24” Fits 8HP & up
M5543 S-24 Small Cylinder 24” Fits 5-6 HP
M5546 S-60 Small Cylinder 60” Fits 5-6 HP
M5547 L-60 Large Cylinder 60” Fits 8HP & up

Special Items

Part # Item
M5522 Adapter plate for CH13S engines – fits K241-301 or M12S
M5523 Belt Tightener-For Engines or Motors with Slotted Bases

*No returns are allowed on electrical parts.

Circuit Breaker

Circuit Breakers adds protection
to the electrical system in case of
overload or shorting to ground.

 

Part # Item Amp Volt
M5040 Circuit Breaker 120 12

 

ENGINE PARTS | 42

Motor Rails / Adapter Plate 

Part # Frame
M5511 145T electric
M5519 184T electric & TH18S
M5516 215 electric
M5513 256T electric
M5520 284T electric
M5505 Adapter Plate 10-15-20

*Prices shown are per pair.

Protective Cover

Part # Item For
E1216 COVER 14 10-14 HP on 30 Gallon Tank
E1217 COVER 20 18-20 HP on 60 Gallon Tank

Motor Bearings

Part # Bearing #
B6203 W4111
B6204 W4111
B6205 W4115
B6206 W4116
B6207 6207zz
B6208 6208zz
B6209 6209zz
B6210 6210zz
B6211 6211zz
B6212 6212zz
B6303 6303zz
B6304 6304zz
B6305 6305zz
B6306 6306zz
B6307 6307zz
B6308 6308zz
B6309 6309zz
B6310 6310zz
B6311 6311zz
B6312 6312zz
B6313 6313zz
B6314 6314zz
B6315 6315zz
B6316 6316zz
B6317 6317zz
B6318 6318zz
B6319 6319zz
B6320 6320zz

PULLEYS | 43

Part # Pulley Model Bushing Required Grooves OD” Belt Type
J5500 1A22X5/8 FIXED BORE 5/8” 1 2.2 A or 4L
J5505 1A25X5/8 FIXED BORE 5/8” 1 2.5 A or 4L
J5510 1A27X5/8 FIXED BORE 5/8” 1 2.7 A or 4L
J5515 1A30X5/8 FIXED BORE 5/8” 1 3.05 A or 4L
J5520 1A35X5/8 FIXED BORE 5/8” 1 3.45 A or 4L
J5525 1A35X7/8 FIXED BORE 7/8” 1 3.45 A or 4L
J5530 1A40X7/8 FIXED BORE 7/8” 1 3.95 A or 4L
J5535 1A45X7/8 FIXED BORE 7/8” 1 4.45 A or 4L
J5540 1A50X7/8 FIXED BORE 7/8” 1 4.95 A or 4L
J5545 1A55X7/8 FIXED BORE 7/8” 1 5.45 A or 4L
J5550 1A60X7/8 FIXED BORE 7/8” 1 5.95 A or 4L
J5605 2B39 L OR H 2 3.95 B or 5L
J5610 2B44 L OR H 2 4.45 B or 5L
J5615 2B52 L OR H 2 5.25 B or 5L
J5617 2B57 L OR H 2 5.75 B or 5L
J5620 2B62 L OR H 2 6.25 B or 5L
J5625 2B69 L OR H 2 6.95 B or 5L
J5630 2B77 L OR H 2 7.75 B or 5L
J5632 3B70 SK 3 7.35 B or 5L
J5638 4B74 SK 4 7.75 B or 5L
J5640 4B86 SK 4 8.95 B or 5L
J5642 4B94 SK 4 9.75 B or 5L

** All pulleys are A, B, 4L and 5L compatible.

PULLEYS | 44

Muska Bushings

Part # Model Shaft Size Type
J6200 LX1 1 L OR H
J6205 LX1-1/8 1-1/8 L OR H
J6206 LX1-3/8 1-3/8 L OR H
J6215 SKX1-3/8 1-3/8 SK
J6210 SKX1-5/8 1-5/8 SK
J6220 SKX1-7/8 1-7/8 SK
J6225 SDX1-3/8 1-3/8 SD
J6226 SDX1-5/8 1-5/8 SD
J6227 SDX1-7/8 1-7/8 SD

Poly-Grooved Pulleys J6

Part # Size Bore
i2100 1 3/4” OD. 5/8”
i2101 2” OD. 5/8”
i2105 2-3/8” OD. 5/8”
i2103 2 1/2” OD. 5/8”
i2104 2” OD. 3/4”

J-6 Multi-Groove Belts

Part # Size
i2050 37
i2051 38
i2052 39
i2053 40
i2054 41
i2055 42
i2056 43
i2057 44
i2058 45
i2059 46
i2060 47
i2061 48
i2062 49
i2063 50
i2064 51
i2065 52
i2066 53

BELTS | 45

Replacement Belts

Belts should be replaced at least every three years.

Glazed, brittle or cracking belts must be replaced. Unlike cars, most compressors will not make an audible squealing noise when belts are slipping. Slipping belts may cause nuisance circuit breaker tripping, excessive vibration and may rip motor mounts apart from sudden snatching of belts in spinning pulley. Loose belts may cause overheating and a possible belt fire. Over- tightening belts may result in bearing or shaft failure.

 

Part # Belt # Outside Dimension Inches “5L” Belt Conversion
i2300  B50  52  530
i2305  B52  54  550
i2310  B54  56  570
i2315  B56  58  590
i2320 B58 60 610
i2325 B60 62 630
i2330 B62 64 650
i2335 B65 67 680
i2340 B68 70 710
i2345 B70 72 730
i2350 B72 74 7750
i2355 B75 77 780
i2360 B78 80 810
i2365 B80 82 830
i2370 B82 84 850
i2375 B85 87 880
i2380 B88 90 910
i2385 B90 92 930
i2390 B92 94 950
i2395 B95 97 980
i2400 B97 99 1000
i2405 B99 101 1020
i2410 BP100 102 __
i2415 BP103 105 __
i2420 BP105 107 __
i2425 BP108 110 __
i2430 BP112 114 __
i2435 BP118 120 __

 

Part # Belt # Outside Dimension Inches “A” Belt Conversion
i2450  4L360  36  34
i2455  4L370 37 35
i2460  4L380 38 36
i2465  4L390 39 37
i2470 4L400 40 38
i2475 4L410 41 39
i2480 4L420 42 40
i2485 4L430 43 41
i2490 4L440 44 42
i2495 4L450 45 43
i2500 4L460 46 44
i2505 4L470 47 45
i2510 4L480 48 46
i2515 4L490 49 47
i2520 4L500 50 48
i2525 4L510 51 49
i2535 4L520 52 50
i2540 4L530 53 51
i2545 4L540 54 52
i2550 4L550 55 53
i2555 4L560 56 54
i2560 4L570 57 55
i2565 4L580 58 56
i2570 4L590 59 57
i2575 4L600 60 58
i2580 4L610 61 59
i2585 4L620 62 60
i2590 4L630 63 61
i2595 4L640 64 62
i2600 4L650 65 63

BELTGUARD | 46

Beltguards – Expanded Metal

Part # Model Size Type
i2700  BG-1P  13”x24”x3”  one piece w/ cover
i2705  BG-2P  15”x24”x3”  one piece w/ cover
i2710  BG-3P  17”x33”x4”  one piece w/ cover
i2745  BG-3SP  17X33X4 S  *Slope/1pc w cover
i2715 BG-4P 19”x36”x4” one piece w/ cover
i2750 BG-4SP 19x36x4 S *Slope/1pc w cover
i2755 BG-10P 22x40x5 one piece w/ cover
i2725 BG-6P 28”x48”x7” one piece w/ cover
i2730 BG-7P 19”x36”x4” slip over w/ tray
i2735 BG-8P 23”x40”x5” slip over w/ tray
i2040 BG-KIT-S Standard Mounting Kit 3 piece
i2045 BG-KIT-E Extended Mounting Kit 3 piece
i2048 BGB-S Standard Top Brace 1 Piece
i2049 BGB-E Extended Top Brace 1 Piece

* Slope guards are intended for engine powered units

*OSHA requires that all exposed moving parts on a compressor must be covered by a guard.

AIR HOSES | 47

Coil Hose

Part # Type Size
H7040  PolyCoil  1/4” x 15’ – 1/4” NPT ends
H7019  PolyCoil  1/4” x 25’ – 1/4” NPT ends
H7029  Nylon  1/4” x 25’ – 1/4” NPT ends
H7025  Nylon  1/4” x 50’ – 1/4” NPT ends

2″ x 3″ Hose

Part # Type Size
S1280  Rubber  2” Hose (2.6” OD) 50 Foot
S1281  Rubber  3” Hose (3.7” OD) 50 Foot

300 PSI Rubber Hose

Part # Type Size
H8103  Rubber  3/8” x 25’ – 1/4” NPT Ends
H8104  Rubber  3/8” x 50’ – 1/4” NPT Ends
H8105  Rubber  3/8” x 100’ – 1/4” NPT Ends
H8100  Rubber  1/2” x 25’ – 1/2” NPT Ends
H8101 Rubber 1/2” x 50’ – 1/2” NPT Ends
H8102 Rubber 1/2” x 100’ – 1/2” NPT Ends
H7030 Rubber 3/4” x 50’ – Twist-Lock Ends

Replacement Hose Stops- by Hose Tract

Part # Item Size
H7055  Hose Stop  3/8”
H7056  Hose Stop  1/2”

Blow Gun

Part # Type Size
P1150 ACS Blow Gun 1/4” ACS

HOSEREEL / MANIFOLDS | 48

Industrial Hosereel – by Hose Tract

Part # Model Max Pres. I.D. Length Weight
H7032  LC-350  300 PSI 3/8” 50 ft. 54 lbs.
H7021  LC-550 300 PSI 1/2” 50 ft. 58 lbs.

Utility Hosereel – by Hose Tract

Part # Model Range I.D. Length Weight
H7051  UTL-350  300 PSI 3/8” 50 ft. 41 lbs.
H7052  UTL-550  300 PSI 1/2” 50 ft. 45 lbs.

Aluminum Control Manifolds

Part # Type (NPT)
R3075  MANIFOLD 1x2x4” (4-1/4” Ports)
R3069  MANIFOLD 1.25×4” (2-1/2” Ports / 6-1/4” )
R3301  4 WAY SQUARE (4-1/4” Ports)
R3304  MANIFOLD 1X2X8” (4 -1/4” Ports)

AIR HOSE FITTINGS | 49

Hammer Lock Fittings

Part # Item
S1282 2” Barb x 2” FPT
S1283 3” Barb x 3” FPT
S1284 2” Full Union
S1285 2” Union Half x 2” MPT
S1286 2” Clamp
S1287 3” Clamp
S1290 2” Close Nipple
S1295 3” Close Nipple

Multiple Connection Manifolds

Part # Description
R3071 3 port 1/4” outlet (3/8” inlet)
R3069 BAR MANIFOLD 2-1/2” & 6-1/4” PORTS
R3075 BLOCK MANIFOLD 4-1/4” PORTS
R3301 4 WAY SQUARE 4-1/4” PORTS

Twistlock Hose Connectors

Part # NPT Type
S1238  2” FEMALE
S1225 1” BARB
S1226 1” FEMALE
S1227 1” MALE
S1228 3/4” BARB
S1229 3/4” FEMALE
S1230 3/4” MALE
S1231 1/2” BARB
S1232 1/2” FEMALE
S1233 1/2” MALE
S1234 Anti-Whip Safety Cable 1/2” to 1-1/4”
S1237 Anti-Whip Safety Cable 1-1/2” to 3”
S1235 Rubber Gasket 1/2”to 1”
S1239 Rubber Gasket 2”
S1236 Safety Clip

Special Fittings

Part # Size Item
S1930 1/4” Air Flow Valve
S1931 1/4” Air Chuck Ball (Plain)
S1932 1/4” Air Chuck Ball with Clip
S1933 1/4” Dual Air Chuck Extension

AIR HOSE FITTINGS | 50

Air Hose Fittings – Quick Couplers

Part # Series Size NPT Type Connection
S1092 Automotive 1/4” 1/4” Coupler Female
S1028 Automotive 1/4” 1/4” Plug Female
S1034 Automotive 1/4” 1/4” Plug Male
S1054 Industrial 1/4” 1/4” Coupler Female
S1051 Industrial 1/4” 1/4” Coupler Male
S1909 Industrial 1/4” 3/8” Coupler Female
S1063 Industrial 1/4” 1/4” Plug Female
S1070 Industrial 1/4” 1/4” Plug Male
S1082 Industrial 1/4” 3/8” Coupler BARB
S1094 Industrial 1/4” 1/4” Plug BARB
S1067 Industrial 1/4” 3/8” Plug BARB
S1910 Industrial 3/8” 1/4” Coupler Female
S1912 Industrial 3/8” 3/8” Coupler Female
S1913 Industrial 3/8” 1/2” Coupler Female
S1917 Industrial 3/8” 1/4” Coupler Male
S1918 Industrial 3/8” 3/8” Coupler Male
S1919 Industrial 3/8” 1/2” Coupler Male
S1901 Industrial 3/8” 1/4” Plug Female
S1902 Industrial 3/8” 1/4” Plug Male
S1903 Industrial 3/8” 3/8” Plug Female
S1904 Industrial 3/8” 3/8” Plug Male
S1900 Industrial 3/8” 1/2” Plug Female
S1914 Industrial 1/2” 3/8” Coupler Female
S1915 Industrial 1/2” 1/2” Coupler Female
S1920 Industrial 1/2” 3/8” Coupler Male
S1921 Industrial 1/2” 1/2” Coupler Male
S1905 Industrial 1/2” 3/8” Plug Female
S1907 Industrial 1/2” 1/2” Plug Female
S1906 Industrial 1/2” 3/8” Plug Male
S1908 Industrial 1/2” 1/2” Plug Male

TANK ACCESSORIES | 51

Machine Leveling Mounts

Part # Max Load Min Load Diameter (In.) Height Bolt
I1900  500 lbs.  100 lbs. 3-1/8” 1-1/2” 3-8”
I1910  1000 lbs.  300 lbs. 4-3/4” 1-1/2” 1/2”
I1920  4500 lbs. 500 lbs. 6-1/4” 1-5/8” 3/4”
I1930  13,000 lbs.  4000 lbs. 9” 2-1/4” 3/4”

Vibration Isolator Pads

Part # Type
I2027 Rubber
I2761 Nitrile

TANK DRAINS | 52

Tank Drains by Aircel

Part # Model Type Max CFM Max PSI Inlet NPT Outlet NPT
S8440  ACC  Float  3500  230  1/2” 1/2”
S8442 AMF  Magnetic  700  230  1/2” 1/8”
S8444  AZL  Zero Loss  3000  230  1/2” 1/2”

Pet Cock Drains

Part # NPT
U1190 1/4”
U1191 1/8”
U1192 3/8”

Cable Drains (Pull Cable)

Part # NPT
S1250* 1/4” HD
S1252 1/4”

TANK DRAINS | 53

Automatic Tank Drains

Part # Model Type
S0910 DH50-0LAAA Pneumatic
S0920 RH50-0LAAA Pneumatic
S1071 Kingston-620 Pneumatic
S1072 Conrader WV1 Pneumatic
S1015 ACS 1/4” NPT Electronic
S3150 ACS 3/8” NPT Electronic
S3151 ACS 1/2” NPT Electronic
S3152 ACS 3/4”NPT Electronic
S3153 ACS 1” NPT Electronic
S1107 Watts D11-04W Float

Bucket High Tank Drain

Part # Size
S1137 1/4” NPT
S1138 3/8” NPT
S1139 1/2” NPT

Champion Drain Repair Kit

Part # Ref #
S1008 Z5941

FITTINGS / TUBING | 54

Tube Fittings

Part # Item
T1100 BRANCH TEE 1/4” COMP X 1/8” NPT
T1110  BRANCH TEE 1/4” COMP X 1/4” NPT
T1120  TEE 1/4” COMPRESSION
T1130  EL 1/4” COMP X 1/4” NPT
T1140  EL 1/4” COMP X 1/8” NPT
T1150  1/4” COMP X 1/4” NPT
T1160  1/4” COMP X 1/8” NPT
T1170  COMP NUT 1/4”
T1175  COMP NUT 5/16”
T1180  COMP FERROL 1/4”
T1190 COMP FERROL 5/16”
T1210 BUSHING 1-1/2” X 1/2”
T1220 BUSHING 1-1/2” X 3/4”
T1230 BUSHING 2” X 1/2”
T1240 BUSHING 2” X 3/4”
T1250 BUSHING 2” X 1”

Copper Tubing

Part # Unit Size
T1031 per foot 3/4”

FITTINGS / TOOLS | 55

Special Fittings for Copper Tubing

Part # Type
T1075  3/4” Flare Nut
T1076  3/4” NPT Male x 3/4” Flare Connector
T1077  3/4” NPT Male 90 EL x 3/4” Flare Connector
T1078  3/4” NPT Male 45 EL x 3/4” Flare Connector
T4000  3/4” NPT Male x 3/4” Compression
T4001  3/4” NPT Male x 3/4” EL Compression
T4002  3/4” Ferrol
T4003  3/4” Nut

Tubing Tools

Part # Item
T1000 3/4” Bender
T1001 5 Piece Set: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”

Blasting Accessories

Hoods & Gloves

Part # Description
H8047 Blast Cabinet Gloves 8” Standard
H8048 Blast Cabinet Gloves 8” Heavy Duty
H8049 Blast Cabinet Gloves 12” Heavy Duty
H8050 Helmet-Light Duty Hood
H8051 Helmet-Heavy Duty Hood

Glass Beads – 50 lbs. Bag

Part # Bead Size
B010 008

FLEX CONNECTORS | 56

Flex Connectors

Part # NPT Size Max PSI
S1017  Steel – Male x Male 1/2” x 18”​ 950 PSI
S1242  Steel – Male x Flare 1/2” x 18”​ 950 PSI
S1037  Steel – Male x Male 1/2” x 24”​ 950 PSI
S1243  Steel – Male x Flare 1/2” x 24”​ 950 PSI
S1024  Steel – Male x Male 3/4” x 18” 725 PSI
S1244  Steel – Male x Flare 3/4” x 18” 725 PSI
S1040 Steel – Male x Male 3/4” x 24” 725 PSI
S1245  Steel – Male x Flare 3/4” x 24” 725 PSI
S1087 Steel – Male x Male 3/4” x 30” 725 PSI
S1246 Steel – Male x Flare​ 3/4” x 30” 725 PSI
S1086 Steel – Male x Male 1” x 18” 575 PSI
S1248 Steel – Male x Flare​ 1” x 18” 575 PSI
S1046 Steel – Male x Male 1” x 24” 575 PSI
S1249 Steel – Male x Flare​ 1” x 24” 575 PSI
S1064 Steel – Male x Male 1” x 30” 575 PSI
S1251 Steel – Male x Flare​ 1” x 30” 575 PSI
S1016 Steel – Male x Male 1 1/4” x 18” 500 PSI
S1018 Steel – Male x Male 1 1/4” x 24” 500 PSI
S1091 Steel – Male x Male 1 1/2” x 18” 425 PSI
S1038 Steel – Male x Male 1 1/2” x 24” 425 PSI
S1059 Steel – Male x Male 2” x 18” 375 PSI
S1048 Steel – Male x Male 2” x 24” 375 PSI
S1042 Steel – Male x Male 2 1/2” x 18” 325 PSI
S1043 Steel – Male x Male 3” x 18” 275 PSI
S1240 Copper 1/2” OD x 18” 200 PSI
S1241 Copper 3/4” OD x 24” 200 PSI

GAUGES | 57

Meters / Gauges

Part # Hour Meters / Gauges
W4602  HOUR METER-Round 440-480 VAC
W4640  HOUR METER-Round 110-250 VAC
W4642  HOUR METER-Round 6-50 VDC
W4646  HOUR METER-Rectangle 110-250 VAC
W4648  HOUR METER-Rectangle 6-50 VDC
W4630  HOUR METER BOX-Round Cover
W4632  HOUR METER BOX-Rectangle Cover
S1264  Adapter Plate 2” Center I.D.
S1265  Adapter Plate 2.5” Center I.D.
S2850  2.25”TEMP GAUGE – Rigid CBM

CBM = Center Back Mount, LM = Lower Mount

GAUGES | 58

Liquid Filled Gauges

Part # Gauges
S2840  PRES GAUGE 2” Liq-Fill 200 Panel Mount
S2845  PRES GAUGE 2-1/2” Liq-Fill 200 Panel Mount
S2855  2.5”Liq-Fill 300 Pres Gauge LM
S2860  2.5”Liq-Fill 200 Pres Gauge LM
S2865  2.5”Liq-Fill 300 Pres Gauge CBM
S2870  2.5”Liq-Fill Vacuum Gauge LM

CBM = Center Back Mount, LM = Lower Mount

Part # NPT Mounting Range Face
S2805 1/8” CBM 160 1-1/2”
S2800 1/4” CBM 160 2”
S2815 1/4” CBM 200 2”
S2820 1/4” CBM 300 2”
S2830 1/8” LM 160 1-1/2”
S2825 1/4” LM 200 2”
S2835 1/2” LM 200 4”
S2810 1/4” LM 300 2”

SAFETY VALVES | 59

Kunkle 6010 Safety Valve – ASME Coded

 

Part # Size CFM PSI
S1195 .75” 318 135
S1196 .75” 350 150
S1193 1” 567 135
S1194 1” 625 150
S1208 1.25” 888 135
S1209 1.25” 978 150
S1210 1.5” 1455 135
S1211 1.5” 1602 150
S1212 2″ 2267 135
S1213 2″ 2496 150
S1214 2.5″ 3714 135
S1215 2.5″ 4090 150

Tank / Compressor Manifolds

Part # NPT
S1622 Strader / Air chuck
S1620 Male / Male
S1621 Male / Female
S1013 Plain

Safety Valves – ASME Coded

Part # Size PSI CFM
S1221 1/8” 250 118
S1032 1/4” 50 51
S1200  1/4” 60 59
S1201 1/4” 75 71
S1202  1/4” 100 92
S1203  1/4” 125 112
S1204 1/4” 150 132
S1206 1/4” 175 153
S1205 1/4” 200 173
S1207 1/4” 250 214
S1220 1/4” 325 275
S1300 1/2” 50 108
S1301 1/2” 75 150
S1306 1/2” 100 190
S1302 1/2” 125 235
S1303 1/2” 150 278
S1304 1/2” 175 321
S1305 1/2” 200 363
S1065 3/4” 50 233
S1400 3/4” 75 325
S1401 3/4” 100 417
S1402 3/4” 125 605
S1403 3/4” 150 601
S1404 3/4” 175 686
S1405 3/4” 200 786
S1500 1” 75 693
S1501 1” 100 889
S1502 1” 125 1085
S1503 1” 135 1164
S1504 1” 150 1281
S1505 1” 175 1477
S1506 1” 200 1673
S1510 1.25” 125 1085
S1507 1.25” 135 1129
S1508 1.25” 150 1231
S1511 1.25” 175 1477
S1509 1.25” 200 1674

< High Temp Viton

CHECK VALVES | 60

Check Valves

 

Part # Type Size
S1036  Load Genie 1/4” NPT x 3/8” Compression
S1058  Load Genie 3/8” NPT x 1/2” Compression​
S1005  Cold Start Aux Unloader 1/8”​
S1006  Cold Start  Aux Unloader 1/4”
S1084  Horizontal Inline  3/8” NPT
S1055  Horizontal Inline  1/2” NPT
S1069 Horizontal Inline 3/4” NPT
S1062 Horizontal Inline 1” NPT
S1011 Horizontal Inline 1 1/4” NPT
S1098 Horizontal Inline 1 1/2” NPT
S1049 Horizontal Inline 2” NPT
S1025 Vertical 1/2” NPT
S1052 Vertical 3/4” NPT
S1035 In-Tank 3/4” NPT x 3/4” Compression
S1141 In-Tank 3/8” NPT x 3/8” Compression
S1615 In-Tank 1/2” NPT x 3/8” Compression
S1142 In-Tank 1/2” NPT x 1/2” Compression
S1050 In-Tank 1/2” NPT x 1/2” NPT
S1026 In-Tank In-Tank 3/4” NPT x 3/4” NPT
S1078  In-Tank 1” NPT x 3/4” NPT
S1140 In-Tank 1” NPT x 1” NPT
S1029 In-Tank 1 1/4” NPT x 1 1/4” NPT
S1022 In-Tank 1 1/2” NPT x 3/4” NPT (fits Kellogg)

 

PILOT VALVES | 61

Pilot / Discharge Valves

 

Part # Model Range
S1614  Conrader Discharge Unloader w/ Toggle  115-135 PSI
S1625  Conrader Discharge Model – D  NA
S1010  CDI  110-130 PSI
S1604  CDI  160-175 PSI
S1045  Conrader w/ Shutoff  135-150 PSI
S1613  Conrader w/ Toggle  135-150 PSI
S1616  Conrader RCL-S HU  115-130 PSI
S1617  Conrader RCB HU (female)  115-130 PSI
S1618  Conrader RCB HU (female)  160-175 PSI

 

Unloader Valves

 

Part # Type
R3076 UNLOADER FITS KELLOGG-CAMPBELL HAUSFIELD – SAYLOR BEALL
R3077 UNLOADER- METRIC – FITS EC AND SAYLOR BEALL CLONES
R3090 UNLOADER – FITS WAYNE

 

BALL / ALL IN ONE VALVES | 62

Ball Valves

 

Part # Size
V1005 1/4”
V1006 3/8”
V1007 1/2”
V1008 3/4”
V1009 1”
V1010 1-1/4”
V1011 1-1/2”
V1012 2”
V1004 Stem

 

All in One Valves

All in One Valves

 

Part # Type Inlet Outlet SET
S1023 CDI 1/2” NPT 1/2” NPT 110-130
S1192 CDI 1/2” NPT 1/2” NPT 110-130
S1632 Conrader 1/2” Flare 1/2” NPT 110-130
S1030 Conrader 1/2” NPT 1/2” NPT 160-175
S1031 Conrader 5/8” Inv Flare 1/2” NPT 160-175
S1033 Conrader 3/4” NPT 3/4” NPT 160-175
S4019 Exhaust Diffuser 3/8” NPT

*S1033 has 1/2” exhaust port. See mufflers on page 22 bronze type S4018

SOLENOID | 63

Solenoid Valves

Part # 120 Volt Part # 240 Volt Part # 24 VAC Model Size NPT Function Connection Type Max Temp Max PSI
W4815 W4816 W4817  8262H002  1/4” 2-way NC Wire Leads 180​ 185
W4825  W4826  W4827  8262H261  1/4”  2-way NO  Wire Leads  180  275
W4850  W4852  W4854  WPSC8238T402  3/8”  2-way NC  DIN 11mm  195  175
W4840  W4842  W4844  WPSC8238U414  3/8”  2-way NO  DIN 11mm  195  175
W4870  W4872  W4874  WPSC8238T405  1/2”  2-way NC  DIN 11mm  195  230
W4860 W4862  W4864  WPSC8238U415  1/2”  2-way NO  DIN 11mm  195  175
W4880 W4882 W4884 WPSC8238T408 3/4” 2-way NC DIN 11mm 195 175
W4890  W4892  W4894  WPSC8238T410  1”  2-way NC  DIN 11mm  195  175
W4831  W4833  W4835  8314H035  *1/4” (1/8”)  3-way NC  Wire Leads 200 205
W4800  W4802  W4804  8314H053  *1/4” (1/8”)  3-way NO  Wire Leads 200 175
W4895  W4896  W4897  8320G192  **1/4”  3-way NO  Wire Leads 200 235

* 3-way valve features two 1/4” ports and vents through coil 1/8”npt port.
**3-way valve features three1/4” ports.

VALVES | 64

Replacement Valves

Part # Make Ref # Type
R3050  Kellogg  48141  LP-EX
R3043  Kellogg  47935  LP-IN
R3020  Kellogg  47936  HP-EX
R3015  Kellogg  50681  HP-IN
R3002  *Super Kellogg  Z-47935  LP-IN
R3004  *Super Kellogg  Z-48141  LP-EX
* Super Kellogg Valves feature larger intake and exhaust ports. Fits 332,335 and 452 Pumps.
R3046  Wayne  AH15-1308  1 1/2” OD
R3036  Wayne  AH15-1305  1 1/8” OD
R3041  Wayne  AH15-1298  1 1/4” OD
R3030  Saylor Beall  4267  LP-IN
R3130 Saylor Beall 4265 HP-IN
R3027 Saylor Beall 4266 LP & HP EX
R3030 ACS & EC Industrial Air
Saylor Beall Copy
050 / 100-15 LP IN
R3130 ACS & EC Industrial Air
Saylor Beall Copy
050 / 100-53 HP IN
R3027 ACS & EC Industrial Air
Saylor Beall Copy
050 / 100-65 LP & HP EX
R3022 Quincy 8133 EX
R3018 Quincy 6540X IN
R3051 Champion Z113 HP IN (old style)
R3021 Champion Z5117 HP IN (new style)
R3072 Champion Z115 HP EX
R3019 Champion Z813 LP EX
R3044 Champion Z812 LP IN
R3054 Champion Z116 LP 1-stage

VALVE PARTS | 65

Valve Seats & Retainers

Part # Ref # Type
R3032  12526  sm. seat
R3053  12529  lg. seat
R3052  12524 sm. retainer
R3026 12528 lg. retainer

Replacement Valves Sets

Part # Model
R3148 Kellogg 335 or Standard 332
R3168  Kellogg New Style Z332
R3149  Kellogg 452
R3150  ACS-050 or EC-5
R3151  ACS-0100 or EC-10
R3152  Saylor-Beall 705
R3153  Saylor-Beall 707
R3040  Champion R15 old style VKR150
R3034  Champion R15 new style VKR15N
R3014  Champion R30 old style VKR300
R3037  Champion R30 new style VKR30N

352/462 Valve Group

Part # Item
K4367  352 Complete Valve Set & Gaskets/Screws
K4368  462 Complete Valve Set & Gaskets/Screws
R3620  352/462 HP IN VALVE AY 38738
R3621  352/462 HP EX VALVE AY 38739
R3622  352/462 LP IN VALVE AY 38736
R3623  352/462 LP EX VALVE AY 38737
K4360  38621 GASKET, VALVE HP 352/462
K4361  38609 GASKET, VALVE LP 352/462
K4372  38602 GASKET, I/C FLANGE 352/462
K4363  38596 GASKET, PLATE 352/462
K4364  48778 GASKET, UL TOWER 352/462
K4366  38908 GASKET, CYL TO HEAD 352/462
K4365  SCREW SET (8), V HOLD DOWN 352/462

VALVE PARTS | 66

Valve Repair Kits

Part # Ref #
R3055  18915 (fits 211)
R3035  45678 (fits 325)
R3042  18868 (fits 321)
R3025  18873 (fits 331)
R3091 Fits EC5-705-UT50
R3092 Fits 332-335
R3093 Fits EC10-707-UT100
R3094 Fits 452

Valve Tools – 1/2” Drives

Part # Make Model Description
R3031  LeROI LTLIC1 Fits 100,200,300
R3045  LeROI LTLEC2 Fits 100,200,300,440,550,660
R3017  LeROI LTLES3 Fits 100,200,300,440,550,660
R3049  LeROI LTLIS4 Fits 440,550,660,770,880,990
R3010  LeROI LTLES5 Fits 440,550,770,880,990
R3058  LeROI LTLES6 Fits 660,880,990
R3060  LeROI LTL-ALL-KIT All LeROI Sleeve Tools listed above
R3024  Kellogg Kellogg Tools These tools fit Kellogg models: 141, 211, 321, 331, 351 and 461. Set of 4.
R3039 Wayne WAT300 Wayne Valve tools
R3028 Wayne WAT200
R3016 Wayne WAT100
R3056 Saylor-Beall SBT200 Fits pumps 703-707,EC5-10,UT50-100
R3038 Saylor-Beall &
Industrial Air
SBT100 Fits pumps 703 / 705-707 (old)
R3011 Quincy QT100 Fits pumps 210 / 206 and others
R3033 Quincy QT200 Fits pumps 325 / 310 / 308 and others

PUMP PARTS | 67

Parts for Kellogg Style Pumps

Part # Part Description
K4005  38599 AFTERCOOLER AY 352
K4010  38920 AFTERCOOLER AY 462
K4017  AFTERCOOLER AY 321
R3710  BEARING CONE 321, 325, 335
R3711  BEARING CONE 331, 332, 452
R3712  BEARING CONE 352, 462
R3713  BEARING CUP 321, 332, 335, 452
R3714  BEARING CUP 352, 462
R3162 BEARING, NEEDLE 14319 1416
R3164 BEARING, NEEDLE 14489 1616
R3166 BEARING, NEEDLE 14318 1012
K4035 47971CAGE HP EX 332, 335, 452
K4040 47928 CAGE LP EX 332, 335, 452
K4045 47930 CAGE HP IN 332, 335, 452
K4055 47922 CAGE LP IN 332, 335, 452
K4060 38787 CRANKSHAFT AY 332, 340
K4065 83620 CRANKSHAFT AY 335
K4070 83622CRANKSHAFT AY 462
K4075 38591 CRANKSHAFT AY 352
K4080 48285 CRANKSHAFT AY 452
K4081 38782 CRANKSHAFT AY 321
K4085 48870 CU AY 321, 332, 335, 452
K4095 17445 CYLINDER 321
K4100 47925 CYLINDER 335, 452
K4105 17119 CYLINDER 352, 462
K4120 48004 FLYWHEEL 335
K4121 31010 FLYWHEEL 332, 452
K4122 38593 FLYWHEEL 352, 462
K4123 38340 FLYWHEEL 321
K4125 47926 HEAD,CYL 335
K4130 38595 HEAD,CYL 352, 462
K4135 77688 HEAD,CYL LH FFW 452
K4140 77687 HEAD,CYL RH FFW 452
K4062 Z-38787 Z332 CRANKSHAFT W C&C
K4214 Z-38241 Z332 LP WRIST PIN
K4352 Z-38272 Z332 ROD ASSY
R3005 Z-47930 Z332 VALVE CAGE LP IN
Part # Ref #
K4118 Z-76514 Z332 HEAD
K4142  76525 INTERCOOLER AY 332
K4145  47940 INTERCOOLER AY 335
K4150  38598 INTERCOOLER AY 352, 462
K4155  48706 INTERCOOLER AY LH FFW 452
K4160  48707 INTERCOOLER AY RH FFW 452
K4165  38325 INTERCOOLER AY “A” 321
K4170  38326 INTERCOOLER AY “B” 321
K4205 38235 PIN, WRIST HP 321​
K4210  38240 PIN, WRIST HP 332
K4211  38241 PIN, WRIST LP 332
K4215  47949 PIN, WRIST HP 335, 452
K4220  38895 PIN, WRIST HP 352, 462
K4225  38895 PIN, WRIST HP 352, 462
K4230  47945 PIN, WRIST LP 335, 452
K4235  38896 PIN, WRIST LP 352, 462
K4250  38236 PISTON HP 321
K4255  38238 PISTON HP 332
K4260  47948 PISTON HP 335, 452
K4265  39110 PISTON HP 352, 462
K4270  38237 PISTON LP 321
K4275  38239 PISTON LP 332
K4280  47944 PISTON LP 335, 452
K4285  39111 PISTON LP 352, 462
K4295  45159 PLATE, CYL HEAD 352, 462
K4300  17274 RING, OIL FEEDER 321, 335
K4305  17757 RING, OIL FEEDER 332
K4310  38586 RING, OIL FEEDER 352
K4315  48675 RING, OIL FEEDER 452
K4320  37104 RING, OIL FEEDER 462
K4325  48284 ROD AY W BRG & INS 452 LP / HP
K4340  38909 ROD AY W BRG & INS 462 LP / HP
K4345  38270 ROD AY W BRG & INS 321 LP, 335 LP / HP
K4347  38271 ROD AY W BRG & INS 321 HP
K4350  38272 ROD AY W BRG & INS 332 LP / HP

High Temp Gaskets

Part # Gasket
K4370  48337 High Temp Exhaust Manifold Gasket 452
K4372  38602 High Temp Flange Gasket 462
K4374  38602 High Temp Exhaust Flange Gasket 462

PUMP PARTS / KITS | 68

Pump Repair Kits

Pump Part # Part # Part #
321  R3540 R3520 R3560
332  R3541 R3521 R3561
335  R3542 R3522 R3562*
352  R3543 R3523 R3563
452  R3544 R3524* R3564*
462  R3545 R3525* R3565*
GL5/EC5  R3546 R3526 R3566
GL10/EC10  R3547 R3527 R3567

Replacement Unloaders

Part # Description
R3134 HP & LP Kellogg Unloader
R-EC001 EC LP Unloader
R-EC002 EC HP Unloader

Flywheel Bushings

Part # Type
R3407 335
R3408 452

Hold Down Covers

Part # Type
R3409 LP
R3410 HP

*Indicate if 1/4” NPT Port is Required in Cover

PUMP PARTS / KITS | 69

Kellogg Head Unloader Repair Kits

Part # Unloader Repair Kits
R3135 332TVX-HUK
R3136 335TVX-HUK
R3137 452TVX-HUK

Saylor Beall Replacement Sight Glass Flange

Part # Description
R3221 crankcase sight glass flange

Kellogg Head Unloader Repair Parts

Part # Parts Ref #
R3138  HP FORK 47965
R3139  LP FORK 47963
R3140  O-RING 47962
R3141 PLUNGER 47961
R3142 NUT 47550
R3143 SPRING 47997
R3147 HP COPPER SEAL (valve) 47938
R3146 LP COPPER SEAL (valve) 47937
R3145 HP O-RING (hold down) 47931
R3144 LP O-RING (hold down) 47933

Champion Adapters

Part # Parts
R3048 Intake Adapter 1”
R3095 3/4” Compression Nut

Kellogg 352 & 462 Replacement Parts

Part # Ref # Type
R3013 45211 pin bushing
R3023 45163 unloader plunger
R3012 45156 piston unloader
R3029 77721 unloader fork

Kellogg & Leroi Unloader Kits

Part # Description
R3047 Fits 462, 331, 321, and 325
R3087 Fits LeROI and Wayne 100 – 990. Includes oil pump vanes. Complete Kit.

AIR FILTERS | 70

Air Filters

Part # Element Type Height ID-OD
S1162  #4 paper  1”  2-1/4” OD
S1181  #6  paper  1-3/8”  3” OD
S1182  #10  paper  1-3/8”  4” OD
S1076 #14  paper  2 5/16”  3” – 4-3/8”
S1075  #127  paper  2”  3” – 4-3/8”
S1183 #15  polyester  2 5/16”  3” – 4-3/8”
S1014  #18P  paper  4 3/4”  3” – 4-3/8”
S1027  #19P  polyester  4 3/4”  3” – 4-3/8”
S1019  #25  polyester  4”  3 5/8” – 5-7/8”
S2200  #31P  polyester  4-3/4”  3 5/8” – 5-3/4”
S2205  #231P  polyester  9-1/2”  3 5/8” – 5-3/4”
S2210  #34P  paper  4-13/16”  4-3/4” – 7-7/8”
S2215  #234P  paper  9-5/8”  4-3/4” – 7-7/8”
S2220  #274P  paper  9-5/8”  8” – 11-3/4”
R4300  #18-12-1  paper  1-3/8”  1-3/8”-2-5/8”

*Element numbers ending with a “P” include an outer prefilter.

Air Inlet Filter Assembly

Part # NPT Element
S1106 1/4” #4
S1132 3/8” #4
S1180 1/2” #6
S1184 1/2” #10
S1112 1/2” #14
S1115 3/4” #14
S1077 1” #14
S1161 1” #19
S1060 1 1/4” #19
S1097 1 1/2” #19
S1093 *1 1/2” #19

* S1093 has extended nipple to fit Kellogg 462 Pump.

OIL / LUBRICANT | 71

Oil & Lubricants

Oil Equivalents Chart

Anderol 3046…………………………. PAO 2000
Anderol 497……………………………. S 2000
Anderol 500……………………………. S 3000
Anderol 750……………………………. S 4000
CETUS PAO 46………………………… PAO 2000
ChemLube 230………………………. S 2000
ChemLube 501………………………. S 3000
ChemLube 751………………………. S 4000
Coolant 32……………………………… Lube 32
CP 4100-150………………………….. S 4000
CP 4100-68……………………………. S 2000
CS 200…………………………………… S 2000
CS 300…………………………………… S 3000
CS 400…………………………………… S 4000
GA-4K…………………………………….. PSL 200
GA-8K…………………………………….. PAO 2000
IR XL-700……………………………….. S 3000
IR XL-740 HT…………………………… S 4000
KSL 219………………………………….. S 3000
KSL 220………………………………….. S 2000
KSL 222………………………………….. S 4000
KSL 720………………………………….. PAO 2000
LLL-4-46…………………………………. PAO 2000
Madrela P 100………………………… S 3000
Madrela P 150………………………… S 4000
Palasyn 45……………………………… PAO 2000
Pallube 32………………………………. Lube 32
ParaFilm 46…………………………….. PSL 200
Pennzcom S-100……………………. S 3000
Pennzcom S-150……………………. S 4000
Pennzcom S-68……………………… S 2000
Quin-Syn………………………………… PAO 2000
Quin-Syn 4……………………………… PSL 200
Rarus 826………………………………. S 2000
Rarus 827………………………………. S 3000
Rarus 829………………………………. S 4000
Rarus SHC 1025…………………….. PAO 2000
Royco 4068……………………………. S 2000
Royco 4100……………………………. S 3000
Royco 4150……………………………. S 4000
Royco 446……………………………… PAO 2000
Sigma 8000 S-100…………………. S 3000
Sigma 8000 S-150…………………. S 4000
Sigma 8000 S-460…………………. PAO 2000
SRF 1/4000……………………………. PSL 200
SSR Ultra Coolant…………………… MAX Coolant
Sullube 32……………………………… Lube 32
Sullube 60……………………………… MAX Coolant
Summa-20……………………………… S 2000
Summa-Recip…………………………. S 3000
Syn-Flo 80-XP…………………………. PAO 2000
Syn-Flo 90………………………………. S 3000
Syn-Star DE 100…………………….. S 3000
Syn-Star DE 68……………………….. S 2000
Synesstic 100………………………… S 3000
Synesstic 150………………………… S 4000
Synesstic 68…………………………… S 2000
SynFilm 46……………………………… PAO 2000
SynthoLube SL 100………………… S 3000
SynthoLube SL 150………………… S 4000
SynthoLube SL 68………………….. S 2000
UltraChem Coolant…………………. MAX Coolant

OIL / LUBRICANT | 72

Reciprocating Lubricants

Oil Description Package Part # Part # 5 Gallon Part # 55 Gallon
#3 – TM 30 Petroleum 30 Wt. (ISO100) w/synthetic additives*  1 Quart >  U9027*  U9019* U9011
#3 – TM 30 Petroleum 30 Wt. (ISO100) w/synthetic additives*  12 Quart Case > U9028*
#3 – TM 30  Petroleum 30 Wt. (ISO100) w/synthetic additives*  1 Gallon > U9014*
#3 – TM 30  Petroleum 30 Wt. (ISO100) w/synthetic additives*  4 Gallon Case >  U9029*
S 3000  Synthetic Diester 30 Wt. (ISO 100)  1 Gallon >  U9062*  U9013* U9012

* Synthetic additives- inhibits the formation of carbon and varnish and provides superior thermal and oxidative stability.

Rotary Screw Lubricants

Oil Description Part # 1 Gallon Part # 5 Gallon Part # 55 Gallon
Maxima-46  Synthetic Polyolester 15Wt. (ISO 46)  – U9067
PAO 2000  Synthetic PAO 15Wt. (ISO 46) U9016 U9017*
S 2000  Synthetic Diester 20Wt. (ISO 68) U9020* U9018
S 3000 Synthetic Diester 30 Wt. (ISO 100) U9062* U9013* U9012
PSL 200 Partial Synthetic with oxidation control agents 15 Wt. (ISO 46) U9030 U9031*
Lube 32 Polyglycol Ester 5W/20 U9032 U9033*
MAX Coolant Polyglycol Ester 10W/20 U9034 U9035*

Air Tool Lubricant

Oil Description Part #
Air Tool Oil Tool Lubrication 1 Pint > U9021
Air Tool Oil Tool Lubrication 20 Pint Case > U9022*
Air Tool Oil Tool Lubrication 1 Quart > U9023*
Air Tool Oil Tool Lubrication 12 Quart Case > U9024*
Air Tool Oil Tool Lubrication 1 Gallon > U9025*
Air Tool Oil Tool Lubrication 4 Gallon Case > U9026*
Part # Model
S2104  Low Oil Switch – Standard
S2105  Low Oil Switch – Vented
S2106  Conduit Adapter 1/2” for S2104

PORTABLE PARTS | 73

Portable Compressor Parts

Portable Compressor Tanks

Part # Size Config. PSI Description L x W Top Plate Weight
I2015  8 gal  twin  150  w/o wheels/non-code  36 x 18  24 x 9  60 lbs.
I2020  22 gal  horiz  150  w/o wheels/non-code  33 x 14  18 x 7.5  53 lbs.

Portable Compressor Accessories

Part # Description
S5005 Wheel – For Twin 8 Tank. 10” x 2.75”. Fits 5/8” Axle, Steel Hub
S5004 Wheel – For 22 Gal Tank. 10” x 1.75” , Fits 1/2” Axle , Plastic Hub (order 2 per tank)
S5003 Rubber Feet , Vibration Dampening. 1/4” mounting.1.5” x5/8”, (Set of 4)
S5002 Handle for 22 Gal Tank
S5001 Handle Grips – For Twin 8 Tank , (Pair) for 7/8” Bar
S5000 Axle, Steel Bar , For Twin 8 Tank. 5/8” x 4-3/4”

Pump Repair Parts

Oil Sight Glass

Part # Type Size
P0005  threaded  1/2” NPT
P0010  threaded  3/4” NPT
P1140  threaded  1” NPT
P0020  press-in  7/8” OD
P1120  press-in  1 1/4” OD
R4005  flange  1.75”x2.94”
R4004  threaded  3/4” NPS

ROTARY SCREW | 74

Intake Valves

Part # Size
V7401 2.5”
V7402 3″
V7403 4″
V7412 6″
V7410 2.5” Repair Kit
V7411 2.5” Inlet Valve Piston
V7415 3” Repair Kit
V7416 4” Repair Kit
V7414 6” Repair Kit
V7405 Adaptor Plate (2.5”)
V7406 Gasket for Adaptor Plate

Thermostatic Oil Bypass Valves

Part # NPT Opens at
V2020 3/4” 180º
V2021 1” 180º
V2022 1 1/2” 180º
V2023 2” 180º

Thermostatic Oil Bypass Valve Repair Kits

Part # Size Temp
V2060 3/4” & 1” 180º
V2061 1.5” 180º
V2062 2” 180º

Minimum Pressure Check Valves

Part # Inlet PSI CFM Pressure Drop @ 100 PSI Cracking Pressure (PSI) Inlet Rear Port Outlet Side Ports
V2050 3/4” 250 100 1.5 60 NA NA
V2051 1 1/4” 250 200 1.1 60 NA 1/4″
V2052 1 1/2” 175 350 1.1 60 NA 1/4″
V2053 2″ 175 750 1.4 60 1/2″ 1/4″
V2054 3” 175 1500 1.0 70 1/2″ 1/4″

ROTARY SCREW | 75

Minimum Pressure Check Valve Repair Kits

Part # Size
V2155 3/4”
V2151 1 1/4″
V2152 1 1/2″
V2153 2″
V2154 3″

Blowdown Valve / Shuttle Valve

Part # Type NPT
V2005 Blowdown 1/4”
V2006 Blowdown 1/2”
V2002 Shuttle 1/8”
V2003 Shuttle 1/4”

* Shuttle Valve: 300PSI max inlet; 26CFM @ 100PSI; 1.25”Wx1.0”H; triggers at 1/2 psi differential

Humphrey Valve / Conrader D

Part # Description
V2008 HUMPHREY 250A-3-10-20
V2009 HUMPHREY 250AA-3-10-20
S1625 Conrader D -Discharge Valve

Swing Gate Valve

Part # Inlet / Outlet Pressure Size
S1700 FPT 150 PSI-WOG 1”
S1701 FPT 150 PSI-WOG 1 1/4″
S1702 FPT 150 PSI-WOG 1 1/2″
S1703 FPT 150 PSI-WOG 2”
S1704 FPT 150 PSI-WOG 2 1/2″
S1705 FPT 150 PSI-WOG 3”

Control Check Valve

Part # Model
V2001 1/4” Control Check Valve

ROTARY SCREW | 76

Control Regulators

Part # Type Set Range NPT
S2500 Non-Vent 125-135 150 1/4”
S2501 Internal Vent 125-135 150 1/4”
S2502 Negative Open 200 1/4”
S2600 2-1/4” Wide 115 125 1/4”
S2601 2-3/4” Wide 100 150 1/4”

High Temperature Switch

Part # Length Thread Setting Connection
S2005 1.135” 1/2” NPT 230°F 6” Wire Leads
S2004 1.135” 3/8” NPT 235°F Screw Terminals
S2003 .698” 3/8” NPT 215°F Screw Terminals
S2002 2.5″ 1/2” NPT 230°F 48” Wire Leads
Part # Model Type Watts Heat Area
W4950  24100 Pad 100 4”x5”
W4951  24150 Pad 150 4”x5”
W4952  24250 Pad 250 4”x5”
W4953 24500 Pad 500 5.5”x8.5”
W4955 1153 Magnetic 200 8 sq.”
W4956 1160 Magnetic 300 20 sq.”

ROTARY SCREW | 77

Scavenge Line Sight Glass

Part # Model
P1110 Scavenge Oil Sight 1/4”

Scavenge Line Filter

Part # Model
P1130 Scavenge Filter 1/4”

Oil Sight Glass

Part # Type Size
P0005 threaded 1/2” NPT
P0010 threaded 3/4” NPT
P0011 threaded 1” NPT
P0012 threaded 1 1/4” NPT
P0013 threaded 1 1/2” NPT
P0014 threaded 2” NPT

*Rotary screw applications / Rated for 300 PSI Max.

Spin on Oil Filter Assembly

Part # Model GPM Ret.. GPM Suc. Weight NPT
P2000 LENZ 752 25 9 3 .75″
P2002 LENZ 1282 70 25 4 1.25″

Replacement Elements

Part # ELM GPM PSI WT. TYPE
P2050 CP-752-10  25  250  1 SPIN ON
P2052  CP-1282-10-50  70  200  2 SPIN ON

Silicone Rubber Donuts

Part # Pipe Size I.D. of Donut
P1301  3/4”  1.050”
P1302 1”  1.315”
P1303 1 1/4”  1.660”
P1304 1 1/2”  1.900”
P1305 2”  2.375”
P1306 2 1/2” 2.875”
P1307 3” 3.500”
P1308 3 1/2” 4.000”
P1309 4” 4.500”

* Sized for schedule 40 standard steel pipe.

ROTARY SCREW | 78

Flexible Coupler Assembly

Part # Pipe Size
P1419 1”
P1420 1 1/4”
P1425 1 1/2”
P1430 2”
P1435 2 1/2”
P1440 3”
P1450 4”

Rubber Sleeves (10 pk)

Part # SIZE
P1001 1/4″
P1002 5/16″
P1003 3/8″
P1004 1/2″

Nylon 12 Tubing

Part # Size Length
T1026 1/4″ 100’
T1028 5/16″ 100’
T1035 3/8″ 100’

Nylon Tubing Special Fittings

Part # Type Size
T1050 Union Tee 1/4”
T1051 Union Tee 5/16”
T1052 Union Tee 3/8”
T1053 Male Connector 1/4” x 1/8”MPT
T1054 Male Connector 1/4” x 1/4”MPT
T1055 Male Connector 5/16” x 1/8”MPT
T1056 Male Connector 5/16” x 1/4”MPT
T1057 Male Connector 3/8” x 1/8”MPT
T1058 Male Connector 3/8” x 1/4”MPT
T1059 Male EL Connector 1/4” x 1/8”MPT
T1060 Male EL Connector 1/4” x 1/4”MPT
T1070 Male EL Connector 5/16” x 1/4”MPT
T1063 Male EL Connector 3/8” x 1/8”MPT
T1064 Male EL Connector 3/8” x 1/4”MPT
T1065 Male EL Connector 1/4” x 1/8”MPT
T1066 Male EL Connector 1/4” x 1/4”MPT
T1068 Male EL Connector 3/8” x 1/8”MPT
T1069 Male EL Connector 3/8” x 1/4”MPT

ROTARY SCREW | 79

Rotary Screw Bearing Retaining Nut Tool

Part # Item Nut Type Socket Depth Tool Diameter
R3073 RNT-04 N 6” 1.375 “
R3065 RNT-05 N 6” 1.563 “
R3062 RNT-06 N 6” 1.75 “
R3063 RNT-07 N 6” 2.063 “
R3061 RNT-08 N 6” 2.25 “
R3059 RNT-09 N 6” 2.531 “
R3066 RNT-10 N 7” 2.688 “
R3067 RNT-11 N 7” 2.969 “
R3068 RNT-12 N 7” 3.156 “
R3210 RNT-13 N 8” 3.375 “
R3212 RNT-14 N 8” 2.969 “
R3213 RNT-15 N 8” 3.156 “
R3214 RNT-16 N 8” 3.375 “
R3211 RNT-04M KM 6” 32 mm
R3202 RNT-05M KM 6” 38 mm
R3203 RNT-06M KM 6” 45 mm
R3204 RNT-07M KM 6” 52 mm
R3200 RNT-08M KM 6” 58 mm
R3205 RNT-09M KM 6” 65 mm
R3206 RNT-10M KM 7” 70 mm
R3207 RNT-11M KM 7” 75 mm
R3201 RNT-12M KM 7” 80 mm
R3209 RNT-13M KM 8” 85 mm
R3215 RNT-14M KM 8” 75 mm
R3216 RNT-15M KM 8” 80 mm
R3217 RNT-16M KM 8” 85 mm

Ways to Order

Online

View all products…

Phone/Fax

Phone: 1(844) 621-4477
Fax: (478) 621-4552

Email

sales@aircomparts.com

Quote Form

View online quote form…

Shopping cart0
There are no products in the cart!
Continue shopping
0